Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management
806 products
View product
Product Model: Brief Description: Convenient NIM chassis power socket for 6 preamplifiers Individually filtered sockets ensure low noise Standard 9-pin D-type connector provides +12V and +24V power The Model 4003 Preamplifier Power Output Module provides a convenient way to deliver DC power from the NIM power box to the preamplifiers when suitable connectors are not available on other modules installed in the power box
View product
Product Model: Brief Description: Blank NIM Modules - Models 400A, 400B and 400C + ORTEC offers blank modules in three standard NIM widths
View product
Product model: Brief description: The main function of the preamplifier is to extract the signal from the detector without significantly reducing the inherent signal-to-noise ratio
View product
Product model: Brief description: Specifically designed for photomultiplier tubes. Input capacitance switch for selectable sensitivity. Input protected. Economical and practical ORTEC113 scintillator preamplifier designed for multiplication and amplification of photomultiplier tube output signals.
View product
Product Model: Brief Description: Ideal for (A) low, (B) medium and (C) high capacitance charged particle or heavy ion detectors Extremely low noise Accepts 0 to 1kV bias Independent fast timing signal output
View product
Product Model: Brief Description: Ideal for charged particle or heavy ion detectors requiring high bias voltages and capacitances up to 100pF Extremely low noise Accepts bias voltages from 0 to 5kV Independent fast timing output signal, rise time The ORTEC142AH model preamplifier is designed to meet the needs of experimenters with performance requirements for charged particle or heavy ion detectors
View product
Product Model: Brief Description: Charge sensitive for general purpose applications Economical and general purpose Accepts bias voltages from 0 to 3kV Low noise
View product
Product Model: Brief Description: Ideal for proportional counters High sensitivity and low noise for soft
View product
Product Model: Brief Description: For use with photomultiplier tubes, electron multipliers, etc. in photon or ion counting applications 1.5ns rise time Voltage gain of 10 Output 0.7V to 50 Small and lightweight ORTEC9301 model low noise, fast rise time preamplifier designed for use with photomultiplier tubes, electron multipliers and other detectors used in photon counting, ion counting or fast timing applications
View product
Product Model: Brief Description: For use with photomultiplier tubes, electron multipliers, etc. in photon or ion counting applications Rise and fall times DC coupling
View product
Product Model: Brief Description: 1GHz preamplifier for timing applications
View product
Product model: Brief description: 9326 fast preamplifier
View product
Product Model: Brief Description: For amplifying very fast rise time signals from microchannel plates, photomultiplier tubes and silicon detectors Rise time 1ns Output drives -5V to 50 Compact preamplifier box
View product
Product model: Brief description: Pulse generator provides electrical pulses that simulate radiation detector events and can be used for setup, diagnostics and noise measurements in spectral measurement systems
View product
Product model: Brief description: 419 precision pulse generator
View product
Product Model: Brief Description: Analog radiation detector output signal can be calibrated to directly read the equivalent energy deposited in a semiconductor radiation detector at rise time line frequency pulse repetition frequency positive or negative polarity direct 0 to 10V output attenuated output 1000:1 attenuation range ORTEC 480 type pulse generator simulates the output signal of a solid state or scintillation radiation detector
View product
Product model: Brief description: ORTEC electronic equipment plays a key role in most energy spectrum measurement counting laboratories, physics institutes and other energy spectrum measurement applications
View product
Product Model: Brief Description: Compact self-contained MCA Two versions available with 2k or 8k resolution Fast (includes dead time correction logic inputs (BUSY and PUR) Gate signal input support With easy-to-use and feature-rich MAESTRO software Fast and convenient USB2 connection Advanced analysis software option EASY-MCA connects to PC via USB2 cable
View product
Product model: Brief description: 276L low power photomultiplier tube holder
View product
Product model: Brief description: High-performance and durable HPGe-level spectrometer, 16k channels
