Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management
806 products
View product
Product Model: Brief Description: Low-cost general-purpose amplifier for semiconductor detectors, scintillation detectors, and proportional counters Gated active baseline restorer with automatic threshold control Optional shaping time constant Positive and negative inputs ORTEC’s Type 575A amplifier is a general-purpose NIM amplifier
View product
Product Model: Brief Description: Can be used with germanium and other semiconductor detectors for fast timing Fast independent integration and differentiation Gated baseline restorer Pole-zero cancellation 50 delay cable limiting Voltage gain X0
View product
Product Model: Brief Description: Can be used with scintillation detectors and proportional counters for counting, timing and energy spectrum analysis. Selectable shaping times (0.5, 1.5 and 3.0s). High count rate capability. Gated active baseline restorer. Selectable window range. Integration/window mode. ORTEC Model 590A amplifier and timed single channel analyzer includes a low noise shaping amplifier and a timed single channel analyzer.
View product
Product model: Brief description: High-performance energy spectroscopy, suitable for all types of radiation detectors (Ge, Si, scintillation
View product
Product model: Brief description: High-performance energy spectroscopy, suitable for all types of radiation detectors (Ge, Si, scintillation
View product
Product Model: Brief Description: Dual Purpose: High and Low Rate Spectroscopy for Ge Radiation Detectors Half Gaussian and Gated Integrator Outputs Gated Integrator Compensates for Charge Collection Time Variations in Ge Radiation Detectors
View product
Product Model: Brief Description: Two-channel Type 575A amplifier using single-width NIM
View product
Product model: Brief description: Pulse shaping and amplification
View product
Product Model: Brief Description: Fast amplifier and discriminator for photon, electron or ion counting applications 100MHz count rate capability Includes count rate monitoring functionality Model ORTEC 9302 is a fast amplifier and discriminator in a single-width NIM standard module designed for use with photomultiplier tubes or electron multipliers in photon, ion or electron counting applications
View product
Product model: Brief description: Rise time DC coupled, allowing high count rates
View product
Product model: Brief description: Rise time DC coupled, allowing high count rates
View product
Product Model: Brief Description: Picosecond Timing Microchannel Plate Detector Microchannel Plate PMT Fast Photodiode Fast Photomultiplier Tube 1-GHz Amplifier and Timing Discriminator Internally Matched for Minimal Wander and Timing Jitter Wander is typical over the first 90% of full scale Jitter is typical at 50% of full scale Optimized for pulse widths from 250ps to 1ns
View product
Product Model: Brief Description: Used to amplify fast analog signals from photomultiplier tubes, electron multipliers, photodiodes, microchannel plates and silicon charged particle detectors Rise time 1ns Gain: 200 Output drives -5V to 50 Eight independent and identical amplifiers in a single-width NIM 20Vrms equivalent input noise The FTA820A amplifier is a high performance, high bandwidth amplifier
View product
Product Model: Brief Description: Delays, gates and delay generators, logic modules and linear gates are mostly used in research or teaching experiments as well as non-research applications such as actively shielded spectrum systems
View product
Product Model: Brief Description: Provides fast coincidence measurements with adjustable resolution time Three selectable positive polarity coincidence inputs One optional positive polarity anti-coincidence input Adjustable 10 to 110ns resolution time The ORTEC Model 414A Fast Coincidence is a modular triple coincidence device that enables fast coincidence measurements between any two or three input signals.
View product
Product model: Brief description: Adjustable delay, width, polarity and amplitude of strobe pulses Positive and negative polarity input pulses Time delay from 0.1 to 110s Output pulse width from 0.4 to 4s Excellent delay stability ORTEC Model 416A gate pulse and delay generator accepts either polarity of input logic pulses and can provide delays up to 110s and output logic pulses with selected amplitude, polarity and width
View product
Product Model: Brief Description: Provides coincidence measurements using majority logic Five positive polarity DC-coupled inputs Each input can be selected as coincident, anti-coincident, or off
View product
Product Model: Brief Description: Aligns fast timing channels containing conformance circuits or TACs 50 calibrated delay cable for linear or logic signals 2ns to 65ns delay in 1ns steps ORTEC Model 425A Nanosecond Delay provides calibrated delays from 0 to 63ns in 1ns steps for any type of signal
View product
Product Model: Brief Description: For transmitting and blocking analog signals in the +0.2 to +10V range Ungated or gated with coincidence or anti-coherence gating External or internal control of gate pulse width The ORTEC Model 426 Linear Gate provides variable gate duration, the width of which is controlled by a single-turn potentiometer mounted on the front panel
View product
Product Model: Brief Description: Powers four preamplifiers and one NIM module Can power up to 16 preamplifiers using optional power fanout cables Available with 100, 120, 220 or 240V AC
