Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management
31 products
View product
Product model: Brief description: The low-contrast detail detection phantom is an experimental tool specially used to detect the performance of X-ray and other equipment in low-contrast environments. The use of low-contrast detail detection phantoms can help medical personnel better understand the performance of imaging equipment, thereby more accurately judge the condition and formulate more effective treatment plans.
View product
Product model: Brief description: The low-contrast detection phantom is a tool specifically used to test the imaging quality of medical imaging equipment. It is mainly used to evaluate and improve the performance of X-ray radiography systems, CR systems and other equipment.
View product
Product model: Brief description: Product introduction Cross lead-embedded scale soft meter ruler (soft lead ruler) KR020 is 30cm long, 3cm wide, 1mm scale spacing, and has lead-embedded scales.
View product
Product model: Brief description: German IBA TYPE39c line pair card is mainly used to test the high resolution of X-ray machines. Measuring range: 1.5-12LP/MM, number of groups: 14. The lead foil thickness is 0.06mm and the size is 30X60mm.
View product
Product model: Brief description: Double wire image quality meter (Germany) is produced according to ISO19232-5/EN462-5/ASTM E2002 standard, ISO19232-5/EN462-5/ASTM E2002 The double-wire image quality meter is composed of 13 wire pairs placed in a rigid translucent plastic box. The diameter of the double-wire image quality meter wire is equal to the distance between the wires. Each wire pair contains two wires with a circular cross-section. Pairs 1D to 3D are tungsten and the other pairs are platinum. The Dual Filament Image Quality Meter is used to determine the geometric unsharpness of radiographic and real-time radiography systems.
View product
Product model: Brief description: Introduction to the dual-wire image quality meter. The style and main dimensions of the dual-wire image quality meter are shown in Figure 1. The basic structure includes: packaging plate, 13 wire pairs, and identification numbers. Each part is bonded to form a rigid whole. The wires are made of platinum and tungsten.
View product
Product model: Brief description: JIMA (Japan Inspection Instrument Manufacturers Association) is committed to focusing on various inspection instruments, including non-destructive testing instruments, JIMA resolution test cards, which are used to measure the resolution of X-ray systems to ensure the image quality of X-ray systems at micron and nanofocus.
View product
Product model: Brief description: Advanced micron technology enables high-precision line pair resolution test cards with 16 different widths (3 to 50μm). Today, microfocus is the dominant X-ray beam size, and resolution test charts are an essential tool for adjusting, setting up, inspecting, and maintaining X-ray systems.
View product
Product model: Brief description: Product introduction German IBA type81 line-to-card type line-to-card is mainly used to test the high resolution of X-ray machines. Measuring range: 0.6-10.0LP/MM, number of groups: 26. The lead foil thickness is 0.1mmPb and 0.05mmPb, and the size is 65×55mm.
View product
Product model: Brief description: Product introduction Cross lead-inlaid scale meter ruler (lead ruler) KR019 is 30cm long, 3cm wide, 1mm scale spacing, and has lead-inlaid scales. 1 set of 2 lead rulers with plexiglass lead ruler box.
View product
Product model: Brief description: Product introduction Lead-embedded scale meter ruler (lead ruler) KR018 is 30cm long, 3cm wide, 1mm scale spacing, and has lead-embedded scales.
View product
Product model: Brief description: Filter plate set (copper plate, aluminum plate, lead plate) KR012-KR01 70.5mm thick copper plate 20cm x 20cm - KR012 1.5mm thick copper plate 20cm x 20cm - KR013
View product
Product model: Brief description: Used to detect the consistency between the light field and the irradiation field of the X-ray machine. This phantom is also used to detect the positioning of the center of the movable grid (Bucky) clamp.
View product
Product model: Brief description: Patient body thick phantom Serial number: VD0203200 25mm thick aluminum with external support plate, used with Primus I-L or DIGI-13 phantom for testing.
View product
Product model: Brief description: Primus I-L detection phantom Serial number: VD0203525 According to DIN 6868-4, 2007 standard, it is used for stability detection of digital fluoroscopy (dynamic flat panel) or conventional fluoroscopy (image intensifier TV) X-ray system.
View product
Product model: Brief description: Primus I-S detection phantom serial number: VD0203515 According to DIN 6868-4, 2007 standard, it is used for stability testing of digital fluoroscopy (dynamic flat panel) or conventional fluoroscopy (image intensifier TV) X-ray system.
View product
Product model: Brief description: Meet the "WS76-2020 Quality Control and Testing Specifications for Conventional Medical X-ray Diagnostic Equipment" Digital X-ray photography and fluoroscopy system detection phantom detectable parameters: Spatial (line pair) resolution Low contrast resolution High contrast resolution Boundaries of useful wire harnesses
View product
Product model: Brief description: The low-contrast detail detection phantom is used to quickly and quantitatively detect image imaging quality, and can be used in X-ray radiography systems, CR systems (TO16); 2. Diameter 250mm, thickness 10mm; there are 12 groups of different detail points in the circular plate, and each group has 12 detail points of different diameters. The contrast of 144 detail points ranges from 0.0014 to 0.924 (at 75kV and 1.5mm copper filtering).
View product
Product model: Brief description: Low-contrast detail detection phantom Leeds, UK / TO16 / TO201. The low-contrast detail phantom is used to quickly and quantitatively detect image imaging quality, and can be used in X-ray radiography systems, CR systems (TO16); fluoroscopy and angiography systems (TO20). 2. Diameter 250mm, thickness 10mm; there are 12 groups of different detail points in the circular plate, and each group has 12 detail points of different diameters. The contrast of 144 detail points ranges from 0.0014 to 0.924 (at 75kV and 1.5mm copper filtering).
View product
Product model: Brief description: Low contrast-detail phantom CD DISC2.0 includes analysis software and carrying case Serial number: VD0203720 It is a contrast-detail phantom dedicated for quality control of fluoroscopy systems, providing quantifiable contrast detail information to clinical practice. Medical diagnosis does not only rely on the image itself, but the diagnostician's ability to perceive image details is also crucial.
