Product consultation
Contact
Detailed introduction
ORTEC DigiDARTIt is a portableHPGemulti-channel analyzer. It is engineered for use in real-world portable gamma-ray spectroscopy measurement applications. From the onboard display to the ergonomic packaging, the entire design meets the needs of field spectrum measurement practitioners.
ORTEC DigiDARTLiving up to expectations, it adopts a fully digital design with threeORTEC - greatly promotes portableMCAdevelopment.
DigiDARTless than weight1160Gram is an attractive, lightweight instrument; easy to use and durable. The shell is moldedABSMaterial - The same material as the strong plastic widely used in cars. Like other tools, the exterior is coated with a shock-absorbing, non-slip, stain-resistant coating. The display and keyboard are recessed to protect them from damage if the instrument is dropped. The connectors are all on one side and are recessed for protection. The battery is inside - Extra protected and covered by a splash-proof battery cover. Even ifDigiDARTWhile running, its battery can also be charged on-site. The battery is truly integrated into the ruggedDigiDARTin, rather than simply clipping onto the back panel; exposed and prone to breaking. Replacing the battery is easy: Simply open the battery cover to replace it.
DigiDARTDisplay and keyboard
DigiDARTAlthough controlled by a computer; it also features a built-in monitor and numeric keypad, making it a modern portableMCAhuge progress. The high-quality display and easy-to-use keyboard mean it can perform a variety of tasks without being connected to a computer
For field applications,PCDifficult to carry and operate, but without a monitor you won't be able to see the spectrum or results.DigiDARTBuilt-in backlightLCDThe display panel and keypad provide you with the necessary data display and control. It has a clear spectrum display and can be started with simple keyboard input/Stop control operation.
DigiDARTThe spectrum display emulates theORTECvery successfulMAESTRO MCAemulator, this emulator is used in thousands of systems.240 x 160PixelLCDDisplay enables user to monitor acquisition process and instrument setup status without connectionPC. It has real-time spectrum display, peak information display and online activity calculation functions of the area of interest.ROIDisplayed as a bar graph below the spectrum.
Real-time activity calculation ... No needPC！
Just click a button,DigiDARTThe nuclide can be executed based on the internally stored calibration information.IDand activity calculations without using connectedPC. Everything is user controllable: Library used for analysis, peak labels, unit labels and calibration parameters displayed. They can all passMAESTROEasily download toDigiDART, they can be changed in the field to suit your changing needs. Can be up to9Calculate activity for a list of nuclides. Spectral data can be saved and then analyzed by more sophisticated computer analysis packages such asGammaVision) to redo a more detailed analysis.
Operation menu
allDigiDARTBoth the screen and operations can be configured using the keypad and display. The operation is very simple - By numbers andEnterkey to select what you want from the displayed list. The main contents include: viewing status, inputID, nuclidesROIContent, peak information, selectionROI, select status contents, adjust controls, general settings and view memory contents. The complete list of all features has been given in the specifications section.
Using the keypad and display, verification or changes can be made in the field without a host computerMCAsettings.
protect
Protecting your data is important, so the menus are password protected. Actions can be divided into two categories: users and administrators. The user password protects the instrument from unauthorized use. That is, you can protect the data stored in memory.ADMINorSetup(Settings) functions are protected by different administrator passwords.ADMINFeatures can only be changed by administrators to ensure results are based on correct parameters.
SMART-1 HPGeRadiation detector support
ORTECofSMART-1Detector technology isHPGeA major advance in radiation detectors and their operation.SMART-1Technology greatly ensures the integrity of the data and monitoring chain. This is a huge advance in detector management practices and data control.
SMART-1 HPGeThe detector is very smart. Built-in controller monitors and reports on all important system functions. It provides individual characteristics as well as overall "health status". The detector controller identifies the devices: each device has its own identifying serial number. To further improve data integrity, the controller can even store verification codes and return them later to ensure data traceability.
DigiDARTUse specialSMART-1"Health Status" (SOH) function to verify that the detector is operating normally during the entire data collection time. After the collection starts,DigiDARTClearSMART-1in the controllerSOHregister. During the data collection process,SMART-1The detector monitors all of its own "vital functions". If any of the monitored functions fall outside the specified value range (even if they subsequently return to normal), the condition is logged. At the end of the collection,DigiDARTWill readSOH, a warning message will be displayed if a problem is detected. No message means no problem was detected. asQApart of the process,SOHThe status is saved together with the spectral data inSPCin the file. anyCONNECTIONSprogram, and even user-developed packages can be passedDigiDARTreadSOHregister to complete the spectrumQA。
UseSMART-1Radiation detector for verification
DigiDART/SMART-1The combination also ensures spectral authenticity. At the beginning of the collection,DigiDARTreadSMART-1The detector's serial number.DigiDARTRandomly generate a number and write itSMART-1detector. At the end of the collection,DigiDARTfromSMART-1The detector reads both numbers and compares the "stop" value to the "start" value. Exact matching ensures data integrity. with allORTEC MCAThe product is the same,DigiDARTYesCONNECTIONSpart of the architecture so these operations can be performed remotely over the network, allowingDigiDARTIdeal for unattended monitoring applications.DigiDARTandSMART-1A simple combination of detectors provides all this functionality and traceability.SMART-1The detector consists of the module shown in the figure, which containsHVand detector controller. These cables come natively with the instrument, are strain-relieved and sealed to prevent water penetration, and do not have high-voltage connectors, eliminating the need forHVAll connector related issues.
Used for nonSMART-1 HPGeDetector interface module for radiation detectors
For older nonSMART-1detector,DigiDARTThe system can be equipped with a detector interface module (DIM）。DIMincluding byDigiDARTcontrolledHV, and connect to the "usual" detector interfaces for preamplifier and high voltage.ORTECcan be done withDigiDARTAll detector types provided for use togetherDIM。DIMUse a single cable to connect toDigiDART。
ORTEC DigiDARTLiving up to expectations, it adopts a fully digital design with threeORTEC - greatly promotes portableMCAdevelopment.
DigiDARTless than weight1160Gram is an attractive, lightweight instrument; easy to use and durable. The shell is moldedABSMaterial - The same material as the strong plastic widely used in cars. Like other tools, the exterior is coated with a shock-absorbing, non-slip, stain-resistant coating. The display and keyboard are recessed to protect them from damage if the instrument is dropped. The connectors are all on one side and are recessed for protection. The battery is inside - Extra protected and covered by a splash-proof battery cover. Even ifDigiDARTWhile running, its battery can also be charged on-site. The battery is truly integrated into the ruggedDigiDARTin, rather than simply clipping onto the back panel; exposed and prone to breaking. Replacing the battery is easy: Simply open the battery cover to replace it.
DigiDARTDisplay and keyboard
DigiDARTAlthough controlled by a computer; it also features a built-in monitor and numeric keypad, making it a modern portableMCAhuge progress. The high-quality display and easy-to-use keyboard mean it can perform a variety of tasks without being connected to a computer
For field applications,PCDifficult to carry and operate, but without a monitor you won't be able to see the spectrum or results.DigiDARTBuilt-in backlightLCDThe display panel and keypad provide you with the necessary data display and control. It has a clear spectrum display and can be started with simple keyboard input/Stop control operation.
DigiDARTThe spectrum display emulates theORTECvery successfulMAESTRO MCAemulator, this emulator is used in thousands of systems.240 x 160PixelLCDDisplay enables user to monitor acquisition process and instrument setup status without connectionPC. It has real-time spectrum display, peak information display and online activity calculation functions of the area of interest.ROIDisplayed as a bar graph below the spectrum.
Just click a button,DigiDARTThe nuclide can be executed based on the internally stored calibration information.IDand activity calculations without using connectedPC. Everything is user controllable: Library used for analysis, peak labels, unit labels and calibration parameters displayed. They can all passMAESTROEasily download toDigiDART, they can be changed in the field to suit your changing needs. Can be up to9Calculate activity for a list of nuclides. Spectral data can be saved and then analyzed by more sophisticated computer analysis packages such asGammaVision) to redo a more detailed analysis.
Operation menu
allDigiDARTBoth the screen and operations can be configured using the keypad and display. The operation is very simple - By numbers andEnterkey to select what you want from the displayed list. The main contents include: viewing status, inputID, nuclidesROIContent, peak information, selectionROI, select status contents, adjust controls, general settings and view memory contents. The complete list of all features has been given in the specifications section.
Using the keypad and display, verification or changes can be made in the field without a host computerMCAsettings.
protect
Protecting your data is important, so the menus are password protected. Actions can be divided into two categories: users and administrators. The user password protects the instrument from unauthorized use. That is, you can protect the data stored in memory.ADMINorSetup(Settings) functions are protected by different administrator passwords.ADMINFeatures can only be changed by administrators to ensure results are based on correct parameters.
SMART-1 HPGeRadiation detector supportORTECofSMART-1Detector technology isHPGeA major advance in radiation detectors and their operation.SMART-1Technology greatly ensures the integrity of the data and monitoring chain. This is a huge advance in detector management practices and data control.
SMART-1 HPGeThe detector is very smart. Built-in controller monitors and reports on all important system functions. It provides individual characteristics as well as overall "health status". The detector controller identifies the devices: each device has its own identifying serial number. To further improve data integrity, the controller can even store verification codes and return them later to ensure data traceability.
DigiDARTUse specialSMART-1"Health Status" (SOH) function to verify that the detector is operating normally during the entire data collection time. After the collection starts,DigiDARTClearSMART-1in the controllerSOHregister. During the data collection process,SMART-1The detector monitors all of its own "vital functions". If any of the monitored functions fall outside the specified value range (even if they subsequently return to normal), the condition is logged. At the end of the collection,DigiDARTWill readSOH, a warning message will be displayed if a problem is detected. No message means no problem was detected. asQApart of the process,SOHThe status is saved together with the spectral data inSPCin the file. anyCONNECTIONSprogram, and even user-developed packages can be passedDigiDARTreadSOHregister to complete the spectrumQA。
UseSMART-1Radiation detector for verification
DigiDART/SMART-1The combination also ensures spectral authenticity. At the beginning of the collection,DigiDARTreadSMART-1The detector's serial number.DigiDARTRandomly generate a number and write itSMART-1detector. At the end of the collection,DigiDARTfromSMART-1The detector reads both numbers and compares the "stop" value to the "start" value. Exact matching ensures data integrity. with allORTEC MCAThe product is the same,DigiDARTYesCONNECTIONSpart of the architecture so these operations can be performed remotely over the network, allowingDigiDARTIdeal for unattended monitoring applications.DigiDARTandSMART-1A simple combination of detectors provides all this functionality and traceability.SMART-1The detector consists of the module shown in the figure, which containsHVand detector controller. These cables come natively with the instrument, are strain-relieved and sealed to prevent water penetration, and do not have high-voltage connectors, eliminating the need forHVAll connector related issues.
Used for nonSMART-1 HPGeDetector interface module for radiation detectors
For older nonSMART-1detector,DigiDARTThe system can be equipped with a detector interface module (DIM）。DIMincluding byDigiDARTcontrolledHV, and connect to the "usual" detector interfaces for preamplifier and high voltage.ORTECcan be done withDigiDARTAll detector types provided for use togetherDIM。DIMUse a single cable to connect toDigiDART。
