News

　　Long rod radiation measuring instrumentMaintenance methods mainly include regular cleaning, correct storage, safe operation and regular inspection and correction. The following is a detailed introduction:
 

　　1. Regular cleaning: Keeping the instrument clean is an important measure to ensure its accuracy. It is recommended that you clean it at least once a month, using a soft, lint-free cloth to gently wipe away dust and dirt from the surface of the device. For dirt that is difficult to clean, you can use a soft cloth dipped in a small amount of industrial alcohol to wipe it, and then wipe it dry with a dry cloth. After cleaning is completed, you can apply a small amount of anti-rust oil (such as WD40) on non-glass parts, but avoid contact with the glass scale.
 

　　2. Correct storage: The storage environment is crucial to the maintenance of measuring instruments. The device should be stored in a dry, well-ventilated room away from drastic changes in temperature and direct sunlight. The indoor temperature should be kept at around 10-16°C, and the relative humidity should be controlled below 60%. Strict moisture-proof measures should be taken especially during thunderstorm seasons. In addition, the instrument should be placed on a wooden cabinet or special cabinet frame to avoid placing it on the ground or leaning against it for a long time to prevent distortion and deformation.
 

　　3. Safe operation: When using, safe operating procedures must be strictly followed. For example, before using a laser radiation measuring instrument, you should understand the physical characteristics and safety standards of laser radiation, and wear appropriate protective equipment such as laser glasses. Before using the electromagnetic radiation detector, you need to check whether there are high-voltage lines or strong electromagnetic interference in the environment to ensure the safety of the area to be measured.
 

　　4. Regular inspection and calibration: Regular inspection and calibration of measuring instruments is the key to maintaining their accuracy. You should regularly check whether the appearance of the equipment is intact, whether the probe is aged or deformed, and perform necessary maintenance and replacement. For equipment such as optical levels and theodolite, key components such as circular levels, crosshairs, and sight distance differences need to be calibrated regularly.
 

　　To sum up,Long rod radiation measuring instrumentMaintenance is a systematic project involving many aspects. By strictly implementing the above measures, the service life of the equipment can be effectively extended and the accuracy and reliability of the measurement results can be ensured.