News

　　USCIRS ATL040 ultrasound phantom is a special phantom that simulates the response characteristics of human tissue in ultrasound imaging. It is usually made of polymer materials or water-based gels and can be set with different acoustic properties, such as sound speed, attenuation coefficient and scattering properties, to simulate the environment of actual biological tissues. These phantoms often have target structures embedded in them for calibration, such as point or linear reflectors, or even more complex tissue-like structures.

 

　　When calibrating ultrasonic equipment, you first need to select a suitable ultrasonic phantom. Depending on the type of ultrasonic equipment to be calibrated, the frequency range and the intended application, select a phantom with appropriate acoustic properties. For example, for obstetrics and gynecology ultrasound, a phantom that simulates the fetus and amniotic fluid may be needed, while for cardiology applications, a phantom that simulates heart structure and blood flow may be needed.

 

　　After selecting a suitable phantom, the next steps include:

 

　　1. Check the phantom: Before use, carefully check the phantom for damage, cracks or leaks. Make sure the phantom is maintained at the proper temperature and pressure, as environmental factors can affect its acoustic performance.

 

　　2. Prepare the ultrasound equipment: Start up and preheat according to the equipment instructions to ensure that the equipment is in appropriate working condition.

 

　　3. Position the phantom: Place the phantom under the ultrasonic probe and ensure that the phantom is in good contact with the probe and there is no air layer between them, because air will interfere with the propagation of ultrasonic waves.

 

　　4. Adjust equipment settings: According to the phantom instructions, adjust the gain, depth, focus and other related settings of the ultrasound equipment.

 

　　5. Acquire images: Start ultrasound scanning to capture images of the calibration target structures in the phantom.

 

　　6. Analyze the image: Use the device's own measurement tools or third-party software to analyze the acquired image and evaluate the image's clarity, contrast, geometric distortion and other parameters.

 

　　7. Adjustment and recalibration: If the image quality does not meet the predetermined standards, the settings of the ultrasound equipment need to be adjusted and recalibrated until satisfactory image results are obtained.

 

　　8. Record and verify: After completing the calibration, record all equipment settings and phantom usage. It is recommended to perform periodic reverse checks, i.e. scan another calibrated phantom using the same settings to verify that the performance of the device remains stable.

 

　　9. Maintenance and maintenance: After the calibration is completed, the phantom should be properly cleaned and stored to prevent aging and damage to ensure accuracy when used next time.

 

　　Through the above steps, it can be ensured that the images provided by the ultrasound equipment have high reliability and accuracy, which is crucial for improving the accuracy of clinical diagnosis. In addition, this standardized calibration process can also help reduce differences between operators and improve consistency between different devices and different medical institutions.

 

　　The American CIRS ATL040 ultrasound phantom plays an important role in the daily quality control and calibration of ultrasound equipment. Using the correct phantom and following standard calibration procedures can significantly improve the quality and reliability of ultrasound diagnosis, thereby providing patients with more precise medical services.