Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management
229 products
View product
Product model: Brief description: Used for performance testing of dental machines and panoramic dental machines. Resolution: 1.6-3.0 LP/mm. Contains 0.5 mm aluminum plate, including diameter 1.0, 1.5, 2.0, 2.5 details. It fully complies with the testing requirements of WS 581-2017 and GB/T 19042.4-2005.
View product
Product model: Brief description: DigiDent dental testing phantom is used for acceptance testing and stability testing of dental digital radiology equipment, complying with IEC 61223-3-4/IEC 61223-2-7 and DIN 6868-5/DIN 6868-151 standards. Phantom specifications: The upper plate contains central annular grooves of different sizes, which are used to place conical collimation tubes of different sizes and 6mm thick aluminum absorbers. The middle plate is a resolution test phantom (there are many types available, see below) and a 0.5 mm aluminum plate for measuring contrast.
View product
Product model: Brief description: Dent-P dental phantom is used for performance testing of dental machines and panoramic dental machines. (1) The upper plate contains central annular grooves with diameters of 70mm, 66mm, 60mm, 55mm, and 50mm, which are used to place tapered collimation cylinders of different sizes and 6mm thick aluminum absorbers with a purity of 99.6%; (2) The middle plate is a high contrast resolution and low contrast resolution test phantom. The high contrast resolution test phantom contains 1.6lp/mm, 2.0lp/mm, 2.2lp/mm, 2.5 lp/mm, 3.0 lp/mm, a total of 5 line pairs, arranged horizontally; (3
View product
Product model: Brief description: CDDETN Contrast-Detail Phantom Includes analysis software and carrying case Serial number: VD0203719 For quality control of dental X-ray systems. The following information can be detected: Contrast-detail curve Low contrast and spatial resolution
View product
Product model: Brief description: CBCT oral cone beam performance testing phantom NY-620 is used for oral cone beam CT (oral and maxillofacial cone beam computed tomography) equipment quality control performance testing. The phantom is used to detect the image uniformity, high contrast resolution, low contrast resolution and ranging error of oral CT machines and oral cone beam CT machines. Meets the "WS818-2023 Cone Beam X-ray Computed Tomography (CBCT) Equipment Quality Control and Testing Standards" and "T/WSJD8-2020 Oral Cone Beam CT Quality Control and Testing Standards".
View product
Product model: Brief description: Mammography aluminum ladder Serial number: VD0203602 Product introduction Mammography aluminum ladder Serial number: VD0203602 It is composed of 21 aluminum steps
View product
Product model: Brief description: The KR-DXR+ light field and radiation field consistency detector can be used at voltages as low as 30 kV and can give objective, reproducible and immediately readable results. Product introduction of optical field detection ruler: The sensor arrangement of the KR-DXR+ light field and radiation field consistency detection ruler is specially designed to meet the needs of real-time detection of the consistency of the radiation field and indicator light field of radiographs and mammography machines.
View product
Product model: Brief description: The Swiss Raysafe DXR+ light field and radiation field consistency detector can be used at voltages as low as 30 kV and can give objective, reproducible and immediately readable results. Product introduction of Swiss Raysafe DXR+ light field and radiation field consistency detection ruler: The sensor arrangement of RaySafe DXR+ is specially designed to meet the needs of real-time detection of the consistency of the irradiation field and indicator light field of radiographs, breast machines.
View product
Product model: Brief description: Product introduction for measuring half value layer (HVL) filter for mammography camera Product introduction for measuring half value layer (HVL) filter for mammography camera Serial number: VD0403310 Size: 100mm x 100mm Aluminum purity: 99.99% Composition: 7 pieces of 0.1 mm aluminum foil
View product
Product model: Brief description: Half-value layer aluminum sheet, portable case with acrylic bracket KR1109 Product Introduction 1. Aluminum sheet is used to detect the half-value layer of useful wire harnesses. 2. Size: 10cm
View product
Product model: Brief description: The American Gammex 156 breast phantom applies gold standard QA solutions to ensure breast health. Standards required for image quality assessment measure and monitor the signal-to-noise ratio, resolution and image quality of mammography systems to simulate the radiological characteristics of 4.2 cm compressed breast tissue to help improve patient outcomes.
View product
Product model: Brief description: Breast detection phantom KR1108 Breast detection phantom KR1108 is used for acceptance and stability testing of screen mammography cameras. Dimensions: 180mm x 240mm Construction: 6 mm thick polymethylmethacrylate (PMMA) board containing horizontal and vertical resolution test charts: 8, 10, 13 and 16 lp/mm respectively
View product
Product model: Brief description: 1. Breast threshold contrast detail phantom is used to determine whether mammography images can indicate very low contrast and very small diameter objects. 2. The main board contains 256 detail contrast modules (10mm deep), each contrast module contains 2 gold foil pieces (purity 99.99%), a total of 512 3.16 row gold foil pieces with a diameter of 0.05-2.0mm and a thickness of 0.03-2.00µm.
View product
Product model: Brief description: Germany IBA Contrast-Detail Phantom CDRAD 2.0 includes analysis software and carrying case Contrast-Detail Phantom, used for digital radiography (CR/DR), can help evaluate image quality and quantify the visibility of image details under different contrasts. In the quality control of radiographic systems: improve image quality; monitor image information (contrast-detail detection, low contrast and spatial resolution testing).
View product
Product model: Brief description: CBCT breast performance testing phantom KR1105 is used for testing of breast equipment quality control. Technical parameters • Main body of the phantom: It is composed of a solid water cone-shaped body with a diameter of 13cm and a height of 10.5cm; it contains 3 groups of modules. An aluminum box is used as a fixed hanging base. The main body of the phantom is hung on the edge of the aluminum box and leveled with water for scanning and detection.
View product
Product model: Brief description: PMMA uniform attenuation phantom-rectangular KR1103 product introduction 1. Used to detect automatic exposure (AEC) of the breast system. 2. Transparent rectangular organic glass plate, size 10X12cm, 4 pieces 1cm thick, 1 piece 2cm thick 1mm.
View product
Product model: Brief description: KR1102 PMMA dose phantom breast detection Serial number: VD1003110 Used to measure CT dose index according to IEC 60601-2-44, IEC 61223-2-5 (DIN EN 60601-2-44, DIN EN 61223-2-6) standards. Phantom specifications: PMMA head phantom, diameter 16cm, 5 holes and plugs
View product
Product model: Brief description: Breast phantom, PASMAM digital mammography detection phantom Serial number: VD0203710 According to German standard PAS 1054, used for acceptance or stability (census and clinical) testing of digital mammography (CR/DR).
View product
Product Model: Brief Description: The School of Radiology Breast Machine Imaging Quality Evaluation Model provides an elegant quality tool for today's imaging systems. The KR1101 Breast Phantom's proven simulation technology enables tissue-equivalent, realistic models for mammography quality. The resin material mimics a range of photon attenuation coefficients of breast tissue. The average elemental composition of the simulated human breast is based on the individual elemental compositions of fat and glandular tissue reported by Hammerstein.
View product
Product model: Brief description: The outer covering layer simulates adipose tissue, and the objects inside simulate microcalcifications, breast duct fibrocalcifications and tumor masses in glandular tissue. It is used for screen/slice mammography and can also be used for CR/DR digital mammography.
