Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management
229 products
View product
Product model: Brief description: FFA 4090 M screen adhesion test phantom Serial number: VD0203281 Complies with EN ISO 4090 standard, used to test the screen adhesion performance in mammography film boxes. The size of the test film cassette can reach 24 x 30cm.
View product
Product model: Brief description: CDMAM 4.0 breast machine low contrast detail phantom (threshold low contrast detail phantom)Phantom composition:Each single diameter has its own unique optimized thickness range of gold, with 16 different thickness levels0.5 mm thick pure aluminum substrate (purity: 99.5%)
View product
Product model: Brief description: Product introduction CDAM3.4 Mammography low contrast detail phantom including analysis software and carrying case Serial number: VD0203701 Used for acceptance testing and annual status testing (census) of mammography census and clinical diagnosis - BMU announced on January 12, 2007.
View product
Product model: Brief description: Acceptance testing and annual status testing (census) for mammography screening and clinical diagnosis - BMU announced on January 12, 2007. Mold body design performance: 0.5mm aluminum (99.5%) substrate
View product
Product model: Brief description: LXchroma luminance meter and colorimeter Serial number: VD0601500 is an integrated device for luminance and chromaticity measurement. It is an ideal testing tool for color image displays. It is suitable for: LCD liquid crystal display LED liquid crystal display PDS plasma display EL organic electroluminescence display FED electroluminescence display
View product
Product model: Brief description: LXcan point luminance meter Serial number: VD0601400 Monochromatic luminance meter with built-in discrete light tube and screen contact measurement mask, an ideal quality control measurement tool that complies with IEC, AAPM and DIN standards Technical specifications: Display: 1.2″TFT (65,000 colors) Sensor consistency: user-defined Distance sensor: ultrasonic distance measurement Target positioning: windowing
View product
Product model: Brief description: Microsoft Windows operating software, used for computer-guided testing and data recording (acceptance and stability testing) of medical imaging display devices, in compliance with DIN V 6868-57, IEC 1223-2-5 and AAPM TG18 quality control requirements for medical displays.
View product
Product model: KR1002 Brief description: The solid water phantom is a quick and easy alternative to traditional water tanks for routine testing of linear accelerator photon beams* Product Features Each Water is tested for water equivalence in an independent calibration laboratory before being put into use. The phantom pieces produced from this special material are strong enough and will not stick together when stacked and stored. Changes in temperature and humidity do not affect the water in any way.
View product
Product model: KD1001 type Brief description: Quick and easy, it can replace the traditional water tank for routine detection of linear accelerator photon beams* Product characteristics Each Water is tested for water equivalence in an independent calibration laboratory before being put into use. The phantom pieces produced from this special material have high enough strength and will not stick together when stacked and stored.
View product
Product model: Brief description: Limb bone density phantom limb phantom (limb phantom for short) is made of radiation-equivalent solid water material [composed of polyethylene (CH) and a small amount of magnesium oxide (MgO) and calcium carbonate (CaCO)] and bone mineral [hydroxyapatite (CaOH (PO))]. The thickness of the phantom and the cylindrical bone sample simulated the measured site and cylindrical bone.
View product
Product model: Brief description: The ultrasonic bone density test phantom A.1 radius bone phantom is shown in Figure A1. The shape is rectangular (length: 135mm, width: 50mm, height: 21mm). The material density is required to be uniform and the surface is highly polished. Its dimensional tolerance does not exceed ±0.1mm. The radius phantom and calcaneus phantom are as shown, with a rectangular shape (length: 60mm, width: 50mm, height: 40mm), and its dimensional tolerance does not exceed ±0.1mm. The surface is highly polished and its dimensional tolerance does not exceed ±0.1mm.
View product
Product model: Brief description: Density parameter HA50 1.16 density HA200 1.26 density HA800 1.65 density HA 1000 1.78 density HA1200 2.23 density Basic material: warp base gray
View product
Product Model: Brief Description: Unilight S Sensitometer Serial Number: VD0204110 Performs 21-level wedge exposure on X-ray film, with the option of blue or green light, with long-term stability and repeatability to produce accurate wedge exposure.
View product
Product model: Brief description: Unilight D density meter Serial number: VD0204108 Obtains film processing parameters through step measurement of 21-step optical wedge photos, and can measure the optical density of X-ray films up to 35 x 35cm. Optical density measurement range: D = 0.00 to D = 4.5
View product
Product model: Brief description: Duolight photosensitive meter and density meter integrated machine Serial number: VD0204300 Unilight S photosensitive meter and Unilight D density meter integrated machine This integrated machine has different series: such as Duolight A, Duolight AS and Duolight ASA, etc.
View product
Product model: Brief description: Comply with IECPET detection phantom, domestically produced 1. PET detection phantom can measure the following indicators of PET: 1) spatial resolution; 2) sensitivity; 3) scattering fraction; 4) NECR.
View product
Product model: Brief description: SPECT detection phantom domestically produced 1. SPECT detection phantom can measure the following indicators of SPECT 1) Measure SPECT inherent plane integral uniformity 2) Inherent spatial resolution 3) Inherent spatial differential linearity
View product
Product model: Brief description: Designed in compliance with the recommendations of IEC and NEMA organizations, and meeting the requirements of the Ministry of Health's "Single Photon Emission Tomography Equipment (SPECT) Quality Control and Testing Specifications" ★ It is a capillary glass tube with an inner diameter of 1mm and an outer diameter of 1.8mm ★ Includes a point source adapter frame to facilitate user measurement and positioning. The SPECT lead grid phantom complies with the relevant provisions of test specification 4.2.
View product
Product model: Brief description: SPECT lead grid phantom complies with the relevant provisions of testing specification 4.2. Measurable SPECT’s inherent spatial resolution Slit width 1.0mm; Distance between slits 30mm, Lead thickness 3mm
View product
Product model: Brief description: PET CT phantom technical parameters: Master cylinder: - Phantom internal length: 180 mm - Fillable spheres (5) Inner diameter: 10 mm, 13 mm, - 17 mm, 22 mm and 28 mm. Distance from sphere to inner wall: 70 mm Empty cylinder volume: 9.7 liters
