Home-Products-Electronic instruments-HV Bias/NIM Power Supplies and Power Enclosures-428 radiation detector bias power supply
Product model:
Brief description:For silicon surface barrier detectors 0 to 1kV Two independently adjustable outputs 1.3M output impedance Current monitoring capability Precision dial ORTEC Model 428 detector bias supply provides bias voltage of any polarity to two semiconductor detectors, current in each detector can be monitored externally via front panel jack
Manufacturer strength
Manufacturer Strength
Valid warranty
Valid Warranty
Quality assurance
Quality AssuranceProducts
PRODUCT CATEGORYRadiological imaging quality control equipment
Portable Radioisotope Identification Device (RIID)
Related articles
RELATED ARTICLES
Detailed introduction
428 Brochure 428 Brochure (A4) 428 Manual The outputs are short-circuit protected, have an impedance of approximately 1.3 MΩ, and have a range of 0 to 1000 V for each output. These outputs are individually selectable using 10-turn direct-reading potentiometers. Constant bias voltage is provided by advanced circuitry with <0.0002% noise and ripple.
This detector bias supply is compatible with all ORTEC preamplifiers that require external detector bias voltage.
Performance
| Noise and ripple | <0.0002％。 |
| temperature instability | ≤±0.02％/°C，0to50°C。 |
| line instability | Proportional to DC power instability (useORTEC 4002series power supply, for105to125 Valternating current,<±0.02%）。 |
Controls and lights
| A/B（0-1000 V） | Front panel for bias control10Circle direct reading potentiometer. |
| POS/OFF/NEG | Front panel switches select positive or negative output for both detectors. |
| Current monitor | Front panel jacks are used to accept external power meters on each output circuit. |
Output
| A/B | on the front panelSHVConnectors provide short-circuit proof outputs for each detector; range0-1000 V; Positive or negative pole of two detectors; Impedance ~1.3 MΩ。 |
electrical and mechanical
| Required power supply | +24 V，205 mA; -24 V，205 mA。 |
| weight | Net weight 1.82Kilogram (4.0pounds). Shipping weight 3.3Kilogram (7.25pounds). |
| Size | NIMdouble wide module,6.90 X 22.13cm (2.70 X 8.714inches), consistent withDOE/ER-0457Trequirements. |
| Model | Description |
| 428 | Detector bias power supply |
Optional cable accessories
| C-36-12 | Bring twoSHVfemale plugRG-59A/U 75ohm cable,12feet long. |
Product consultation
Product consultation
Contact
