Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management
229 products
View product
Product model: Brief description: Meet the "WS76-2020 Quality Control and Testing Specifications for Conventional Medical X-ray Diagnostic Equipment" Digital X-ray photography and fluoroscopy system detection phantom detectable parameters: Spatial (line pair) resolution Low contrast resolution High contrast resolution Boundaries of useful wire harnesses
View product
Product model: Brief description: The low-contrast detail detection phantom is used to quickly and quantitatively detect image imaging quality, and can be used in X-ray radiography systems, CR systems (TO16); 2. Diameter 250mm, thickness 10mm; there are 12 groups of different detail points in the circular plate, and each group has 12 detail points of different diameters. The contrast of 144 detail points ranges from 0.0014 to 0.924 (at 75kV and 1.5mm copper filtering).
View product
Product model: Brief description: Low-contrast detail detection phantom Leeds, UK / TO16 / TO201. The low-contrast detail phantom is used to quickly and quantitatively detect image imaging quality, and can be used in X-ray radiography systems, CR systems (TO16); fluoroscopy and angiography systems (TO20). 2. Diameter 250mm, thickness 10mm; there are 12 groups of different detail points in the circular plate, and each group has 12 detail points of different diameters. The contrast of 144 detail points ranges from 0.0014 to 0.924 (at 75kV and 1.5mm copper filtering).
View product
Product model: Brief description: Low contrast-detail phantom CD DISC2.0 includes analysis software and carrying case Serial number: VD0203720 It is a contrast-detail phantom dedicated for quality control of fluoroscopy systems, providing quantifiable contrast detail information to clinical practice. Medical diagnosis does not only rely on the image itself, but the diagnostician's ability to perceive image details is also crucial.
View product
Product model: Brief description: The German IBA CR/DR detection phantom DIGI-13 is used for quality inspection of CR and DR imaging systems (including uniformity, spatial resolution, low contrast resolution, visible light field and X-ray field calibration and artifacts, etc.) according to DIN6868-13 standard.
View product
Product model: Brief description: Used for quality inspection of all types of CR and DR imaging systems. The following parameters can be detected simultaneously: spatial resolution, low contrast resolution, dynamic range, light field and illumination field consistency, and spatial distance accuracy.
View product
Product model: Brief description: Multifunctional image quality detection phantom is used for CRDR low-density resolution, spatial resolution, radiation field and light field consistency, and uniformity detection.
View product
Product model: Brief description: According to DIN 6868-13 standard, used for quality inspection of CR and DR imaging systems (including uniformity, spatial resolution, low contrast resolution, calibration and artifacts of visible light fields and X-ray fields, etc.).
View product
Product model: Brief description: Used for filming, digital X-ray imaging systems and fluoroscopy system inspections. It can detect items such as light field/radiation field consistency, spatial resolution, low contrast resolution, dynamic range and image consistency.
View product
Product model: Brief description: Used for filming, digital X-ray imaging systems and fluoroscopy system inspections. It can detect items such as light field/radiation field consistency, spatial resolution, low contrast resolution, dynamic range and image consistency.
View product
Product model: Brief description: The NY-405RF low-contrast detail detection phantom can redefine the details and contrast observed by radiologists. It can be used throughout the entire range of radiological diagnostic imaging systems, such as fluoroscopy and angiography. It has 225 holes that create subtle contrast changes.
View product
Product model: Brief description: DRLRIEC-18 low contrast detail inspection phantom • DRLRIEC-18 meets WS 521-2017 "Specification for quality control inspection using digital radiography (DR) systems" Appendix B.1 IEC low contrast phantom requirements • 40mm organic glass (PMMA) module
View product
Product model: Brief description: Low contrast phantom. This phantom consists of a set of aluminum circular disks with a diameter of 1cm (21 circular holes in total). If used, block attenuation phantoms provide X-ray attenuation and hardening under automatic exposure control, allowing these disks to produce X-ray radiation contrast varying from 0.8% to 20%.
View product
Product model: Brief description: Low contrast test card, the test card is made of 20mm thick aluminum plate. Lcm aperture round holes are evenly distributed on the aluminum plate. The depth of the holes (mm) and contrast (value in brackets 96) vary from 0.07mm (03596) to 32mm (16%), a total of 19 round holes.
View product
Product model: Brief description: 19-hole low-contrast detail detection phantom KR0011. Used for low-contrast detail resolution detection of CR and DR imaging systems. 2. Diameter 100mm, 20mm thick; 19 round holes with 1cm diameter evenly distributed on the aluminum plate.
View product
Product model: Brief description: Blue Water Tank 2 is the only water tank system that can be tailored to the specific needs of the user, ensuring efficiency and precision. Physicists can select the required features from a range of options to configure the system to meet the user's specific needs.
View product
Product model: Brief description: DOSE1 is a portable, single-channel, high-precision reference-level electrometer. Its measurement indicators significantly exceed the standards specified by IEC 60731 and AAPM. It has extremely high accuracy and provides extremely high resolution capabilities over a wide dynamic range. This electrometer can use ionization chambers, semiconductor probes and diamond probes to measure absorbed dose. The stability of the ionization chamber response can be verified and cross-calibrated using radioactive inspection sources.
View product
Product model: Brief description: Beam debugging and annual QA inspection tool phantoms, detectors and accessories. •Menu-guided workflow for easy operation •Automatic queue generation •Adjustable scan parameters for optimized measurements •TrueBeam™/FFF scan-based analysis
View product
Product model: Brief description: KermaX® plus is the general name for a series of dose-area multipliers. It has the following types and is a perfect solution for obtaining diagnostic dose reference levels, patient individual dose values and radiological examination quality control.
View product
Product model: Brief description: The ideal solution for easy and fast patient dose monitoring. It can only measure dose area product (DAP) and dose area product rate (DAPR).
