Radiological imaging quality control equipment

Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management

Search products

Search

229 products

CT performance testing phantom Catphan 600

View product

Product model: Brief description: American Phantom Laboratory CT performance testing phantom Catphan 600 can complete performance evaluation and quality assurance of axial CT scanning and spiral imaging systems. Catphan 600 has a new CTP591 module based on the original 500. This module includes 2 sets of precision slashes, which provides us with the conditions to evaluate millimeter and sub-millimeter level layer thickness. The improved CTP400 module adds more material samples. This allows us to more comprehensively evaluate CT linear values. For more detailed parameter differences, please ask the general agent Shanghai Nayou.

CTP104 CT quality control performance testing phantom

View product

Product model: Brief description: CT quality control performance testing phantom: ① The phantom meets the requirements of national standards and can measure: CT linearity, layer thickness, positioning light accuracy, low contrast detectability, high contrast resolution, water CT value, uniformity and noise, inner diameter ≥ 20cm ② CT value linear materials include: air, polyethylene, plexiglass, polytetrafluoroethylene; ③ The angle between the tungsten wire of the layer thickness measurement unit and the straight line at the upper and lower ends of the component is ≥ 26.6°;

CTP103 CT low contrast performance detection phantom

View product

Product model: Brief description: CT low contrast module: a series of cylindrical rods of various diameters and 12 contrasts used to measure low contrast performance. The 40mm long rod provides consistent contrast values ​​at all z-axis positions, thus avoiding any volume averaging errors when scanning sections. Unique secondary test objects enable evaluation of different scanning protocols

RGRMS-2016 CT imaging performance testing phantom

View product

Product model: Brief description: RGRMS-2016 CT imaging performance testing phantom (hereinafter referred to as RGRMS phantom) is a new type of testing and evaluation equipment developed for medical CT image quality control management. The phantom can standardize, quickly and accurately detect and evaluate the imaging performance of multi-row CT scanning systems.

CTP500 CT performance phantom

View product

Product Model: Brief Description: CT Performance Phantom CTP500 Model The functions of the CTP500 model enable optimal performance characterization of multi-slice CT and enhanced sensitivity measurement required for radiotherapy. The Catphan° 600 features enhanced measurement capabilities for precise measurement of thin sections and higher resolution in multi-slice scanners.

CCT189 low contrast body phantom

View product

Product Model: Brief Description: CCT189 Low Contrast Body Phantom The CCT189 Phantom has eight contrast rods. The four contrast rods are 40mm long, and each of these rods has a different diameter and nominal contrast ratio. Samples from each batch of selected contrast rods are tested with multiple scans on our in-house CT scanner. Scans of the contrast rod are analyzed through automated analysis. And these contrasts are measured as intrinsic. For a more precise assessment of your phantom.

CT dose phantom Poland Project Pro-CT Dose

View product

Product model: Brief description: CT head and body dose phantom can be used with any computed tomography (CT) system designed for head and body imaging. The phantom recognizes dose information for the head and body. This dose phantom allows the user to collect information for determining the maximum, minimum, and intermediate values ​​of normal tomographic surface thickness when performing dose distribution measurements.

KR102 PMMA dose phantom Serial number: VD1003110

View product

Product model: Brief description: PMMA dose phantom Serial number: VD1003110 Used to measure CT dose index according to IEC 60601-2-44, IEC 61223-2-5 (DIN EN 60601-2-44, DIN EN 61223-2-6) standards.

CT dose phantom

View product

Product Model: KR101 Brief Description: The CT dose detection phantom can be used with any computed tomography (CT) system designed for head and body imaging. The phantom recognizes dose information for the head and body. This dose phantom allows the user to collect information for determining the maximum, minimum, and intermediate values ​​of normal tomographic surface thickness when performing dose distribution measurements.

ISO19232-5 double wire image quality meter

View product

Product model: Brief description: Double wire image quality meter (Germany) is produced according to ISO19232-5/EN462-5/ASTM E2002 standard, ISO19232-5/EN462-5/ASTM E2002 The double-wire image quality meter is composed of 13 wire pairs placed in a rigid translucent plastic box. The diameter of the double-wire image quality meter wire is equal to the distance between the wires. Each wire pair contains two wires with a circular cross-section. Pairs 1D to 3D are tungsten and the other pairs are platinum. The Dual Filament Image Quality Meter is used to determine the geometric unsharpness of radiographic and real-time radiography systems.

EN462-5 double wire image quality meter

View product

Product model: Brief description: Introduction to the dual-wire image quality meter. The style and main dimensions of the dual-wire image quality meter are shown in Figure 1. The basic structure includes: packaging plate, 13 wire pairs, and identification numbers. Each part is bonded to form a rigid whole. The wires are made of platinum and tungsten.

Japan JIMA resolution test chart

View product

Product model: Brief description: JIMA (Japan Inspection Instrument Manufacturers Association) is committed to focusing on various inspection instruments, including non-destructive testing instruments, JIMA resolution test cards, which are used to measure the resolution of X-ray systems to ensure the image quality of X-ray systems at micron and nanofocus.

RT CT-05B X-ray micron resolution test card

View product

Product model: Brief description: Advanced micron technology enables high-precision line pair resolution test cards with 16 different widths (3 to 50μm). Today, microfocus is the dominant X-ray beam size, and resolution test charts are an essential tool for adjusting, setting up, inspecting, and maintaining X-ray systems.

Cross-embedded lead scale meter ruler (lead ruler) KR019

View product

Product model: Brief description: Product introduction Cross lead-inlaid scale meter ruler (lead ruler) KR019 is 30cm long, 3cm wide, 1mm scale spacing, and has lead-inlaid scales. 1 set of 2 lead rulers with plexiglass lead ruler box.

Lead-embedded meter ruler (lead ruler) KR018

View product

Product model: Brief description: Product introduction Lead-embedded scale meter ruler (lead ruler) KR018 is 30cm long, 3cm wide, 1mm scale spacing, and has lead-embedded scales.

Filter plate set (copper plate, aluminum plate, lead plate) KR012-KR017

View product

Product model: Brief description: Filter plate set (copper plate, aluminum plate, lead plate) KR012-KR01 70.5mm thick copper plate 20cm x 20cm - KR012 1.5mm thick copper plate 20cm x 20cm - KR013

VISI-X detection phantom serial number: VD0509100

View product

Product model: Brief description: Used to detect the consistency between the light field and the irradiation field of the X-ray machine. This phantom is also used to detect the positioning of the center of the movable grid (Bucky) clamp.

Patient body thickness phantom Serial number: VD0203200

View product

Product model: Brief description: Patient body thick phantom Serial number: VD0203200 25mm thick aluminum with external support plate, used with Primus I-L or DIGI-13 phantom for testing.

Primus I-L detection phantom

View product

Product model: Brief description: Primus I-L detection phantom Serial number: VD0203525 According to DIN 6868-4, 2007 standard, it is used for stability detection of digital fluoroscopy (dynamic flat panel) or conventional fluoroscopy (image intensifier TV) X-ray system.

Primus I-S detection phantom

View product

Product model: Brief description: Primus I-S detection phantom serial number: VD0203515 According to DIN 6868-4, 2007 standard, it is used for stability testing of digital fluoroscopy (dynamic flat panel) or conventional fluoroscopy (image intensifier TV) X-ray system.