Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management
107 products
View product
Product Model: Brief Description: Fast amplifier and discriminator for photon, electron or ion counting applications 100MHz count rate capability Includes count rate monitoring functionality Model ORTEC 9302 is a fast amplifier and discriminator in a single-width NIM standard module designed for use with photomultiplier tubes or electron multipliers in photon, ion or electron counting applications
View product
Product model: Brief description: Rise time DC coupled, allowing high count rates
View product
Product model: Brief description: Rise time DC coupled, allowing high count rates
View product
Product Model: Brief Description: Picosecond Timing Microchannel Plate Detector Microchannel Plate PMT Fast Photodiode Fast Photomultiplier Tube 1-GHz Amplifier and Timing Discriminator Internally Matched for Minimal Wander and Timing Jitter Wander is typical over the first 90% of full scale Jitter is typical at 50% of full scale Optimized for pulse widths from 250ps to 1ns
View product
Product Model: Brief Description: Used to amplify fast analog signals from photomultiplier tubes, electron multipliers, photodiodes, microchannel plates and silicon charged particle detectors Rise time 1ns Gain: 200 Output drives -5V to 50 Eight independent and identical amplifiers in a single-width NIM 20Vrms equivalent input noise The FTA820A amplifier is a high performance, high bandwidth amplifier
View product
Product Model: Brief Description: Delays, gates and delay generators, logic modules and linear gates are mostly used in research or teaching experiments as well as non-research applications such as actively shielded spectrum systems
View product
Product Model: Brief Description: Provides fast coincidence measurements with adjustable resolution time Three selectable positive polarity coincidence inputs One optional positive polarity anti-coincidence input Adjustable 10 to 110ns resolution time The ORTEC Model 414A Fast Coincidence is a modular triple coincidence device that enables fast coincidence measurements between any two or three input signals.
View product
Product model: Brief description: Adjustable delay, width, polarity and amplitude of strobe pulses Positive and negative polarity input pulses Time delay from 0.1 to 110s Output pulse width from 0.4 to 4s Excellent delay stability ORTEC Model 416A gate pulse and delay generator accepts either polarity of input logic pulses and can provide delays up to 110s and output logic pulses with selected amplitude, polarity and width
View product
Product Model: Brief Description: Provides coincidence measurements using majority logic Five positive polarity DC-coupled inputs Each input can be selected as coincident, anti-coincident, or off
View product
Product Model: Brief Description: Aligns fast timing channels containing conformance circuits or TACs 50 calibrated delay cable for linear or logic signals 2ns to 65ns delay in 1ns steps ORTEC Model 425A Nanosecond Delay provides calibrated delays from 0 to 63ns in 1ns steps for any type of signal
View product
Product Model: Brief Description: For transmitting and blocking analog signals in the +0.2 to +10V range Ungated or gated with coincidence or anti-coherence gating External or internal control of gate pulse width The ORTEC Model 426 Linear Gate provides variable gate duration, the width of which is controlled by a single-turn potentiometer mounted on the front panel
View product
Product Model: Brief Description: Powers four preamplifiers and one NIM module Can power up to 16 preamplifiers using optional power fanout cables Available with 100, 120, 220 or 240V AC
View product
Product Model: Brief Description: Convenient NIM chassis power socket for 6 preamplifiers Individually filtered sockets ensure low noise Standard 9-pin D-type connector provides +12V and +24V power The Model 4003 Preamplifier Power Output Module provides a convenient way to deliver DC power from the NIM power box to the preamplifiers when suitable connectors are not available on other modules installed in the power box
View product
Product Model: Brief Description: Blank NIM Modules - Models 400A, 400B and 400C + ORTEC offers blank modules in three standard NIM widths
View product
Product model: Brief description: The main function of the preamplifier is to extract the signal from the detector without significantly reducing the inherent signal-to-noise ratio
View product
Product model: Brief description: Specifically designed for photomultiplier tubes. Input capacitance switch for selectable sensitivity. Input protected. Economical and practical ORTEC113 scintillator preamplifier designed for multiplication and amplification of photomultiplier tube output signals.
View product
Product Model: Brief Description: Ideal for (A) low, (B) medium and (C) high capacitance charged particle or heavy ion detectors Extremely low noise Accepts 0 to 1kV bias Independent fast timing signal output
View product
Product Model: Brief Description: Ideal for charged particle or heavy ion detectors requiring high bias voltages and capacitances up to 100pF Extremely low noise Accepts bias voltages from 0 to 5kV Independent fast timing output signal, rise time The ORTEC142AH model preamplifier is designed to meet the needs of experimenters with performance requirements for charged particle or heavy ion detectors
View product
Product Model: Brief Description: Charge sensitive for general purpose applications Economical and general purpose Accepts bias voltages from 0 to 3kV Low noise
View product
Product Model: Brief Description: Ideal for proportional counters High sensitivity and low noise for soft
