Home-Products-Radiological imaging quality control equipment-DSA performance testing tool-DSA simulated arterial blood vessel detection phantom KR201
DSA simulated arterial blood vessel detection phantom KR201
Product model:
Brief description:1. Minimum resolution size of simulated arterial blood vessels and motion artifact detection module sculpting agent concentration: one piece each of 150mg/mL and 1300mg/mL, three simulated blood vessels, with width and thickness of 1.0, 2.0 and 4.0mm respectively. Each tube has simulated arterial stenosis and aneurysm. The widths are 1/4, 1/2 and 3/4 of the width of a single artery respectively. The module size is 300*150*25.4mm, as shown in the figure 2. Low-contrast iodine line pair test plug-in
Manufacturer strength
Manufacturer Strength
Valid warranty
Valid Warranty
Quality assurance
Quality Assurance
Product consultation
ContactProducts
PRODUCT CATEGORYRadiological imaging quality control equipment
American RSD phantomCRDR machine detection toolCT detection toolsDental machine testing toolsBreast testing kitDSA performance testing toolRadiotherapy and Nuclear Medicine TestingX-ray machine multifunctional quality detectorConventional X-ray photography inspection phantomUltrasound diagnostic quality control testing phantomMultifunctional dose area product meterMagnetic Resonance Machine Testing Toolsbone density phantomSimulation phantomsolid waterSensitometers and Densitometersluminance meterPortable Radioisotope Identification Device (RIID)
Detective-200 rugged, ultra-high sensitivity, portable HPGe radionuclide identification systemRADEAGLE-Cx high sensitivity, high adaptability detection unit, suitable for diversified radiation detection and nuclide identification applicationsRADEAGLET-R Rugged, lightweight, handheld radionuclide identification deviceRADEAGLE, the handheld radioisotope identification instrumentDetective-100T HPGe-based handheld radioisotope identifierMicro-Detective Ultralight Portable Handheld Radioisotope IdentifierDetective X ultra-high resolution HPGe radioisotope identification deviceDetective DX1 is a new generation, ultra-high-resolution and high-purity germanium nuclide identification instrument.Micro-Detective-HX Advanced Handheld Radiation Detection and Identification RIID- Counters, timers, rate meters and multi-channel scalers (MCS)Digital current integratoramplifierCables and accessoriespreamplifierpulse generatormulti-channel analyzerSingle channel analyzerDelays, Gates and Delay Generators, Logic Blocks and Linear GatesFast timing discriminatorTime-to-amplitude converters and calibratorsHV Bias/NIM Power Supplies and Power EnclosuresPhotomultiplier tube (PMT) base
- timing systemGammaScreen-8 Total Gamma Screen Counterα/β counterStandFAST II Standing Full Body CounterOnline monitoring systemOS1700 Tritium AdopterCompton suppression counting systemPINS3-CF Chemicals and Explosives Identification SystemCustomized systemwaste analysis systemchemical identificationnuclear safeguardshealth physics systemfood monitoring system
- FRAM plutonium and uranium isotope analysisMGA++ γ-ray isotope ratio actinide analysisNuclide Navigation-Pro, interactive nuclide map, reference softwareRenaissance whole body counter softwareANGLE advanced gamma spectrum measurement efficiency calibration softwareAlphaVision alpha spectrum measurement softwareDataMaster spectrum file format converterGammaVision gamma spectrum analysis softwareGammaVision Report GeneratorGlobal Value Productivity Suite by GammaVisionISOTOPIC gamma spectroscopy waste determinationMAESTRO Multichannel Analyzer SimulationMAESTRO-Pro Advanced Spectrum SoftwareCONNECTIONS Programmer's Toolkit
Related articles
RELATED ARTICLES- Important equipment for radiation environment monitoring: A brief analysis of the application of KARRAY neutron dose rate meter
- Application of radiotherapy three-dimensional water tank in radiotherapy
- X-ray multifunctional quality detector is an important non-destructive testing equipment
- A thermoluminescence dosimeter is an analytical device used to measure radiation dose
- 2026 Radiation Detector Purchase and Avoidance Guide: How does KARRAY Technology solve the industry’s pain points with “technology + service”?
- Online radiation alarm is the key equipment for modern radiation protection
- Application of low contrast detail detection phantom
- KARRAY Technology: The cutting-edge power of domestic dose area product meters, technical strength and product line analysis
- Low contrast detail detection phantom丨Product Encyclopedia
- Thermoluminescent dose readers require regular calibration and calibration
Detailed introduction
1, Minimum resolution size of simulated arteries and motion artifact detection module
Shaping agent concentration:150mg/mL1300mg/mLOne piece each, three simulated blood vessels, the width and thickness are respectively1.0、2.0and4.0mm, with simulated arterial stenosis and aneurysm on each tube,
The width is the width of a single artery1/4、1/2and3/4, the module size is300*150*25.4mm, as shown in the figure2, low contrast iodine line pair test plug-in
There are3A group of test lines filled with iodine contrast agent, each group of lines consists of4It consists of lines with different diameters, and the diameters are respectively0.5、1.0、2.0 4.0mm。3The concentrations of iodine contrast agent in the group line groups are respectively2.5、5.0and10.0mg/cc. The module size is200*150*25.4mm, as shown in the figure
3, Image linear test plug-in
There are six circularly distributed on the test board19mmThe test area has different iodine thickness and triiodine concentration, respectively20.0、10.0、4.0、1.0、0.5mg/cm3, the size is200*150*25.4mm, as shown in the figure.4, skeleton simulation test block
Contains three simulated bonesPTFEBar, width is:25mm, the thicknesses are respectively5、10、15mmThick. Dimensions are200*200*25.4mm, as shown in the figure.5, blank insert
Plexiglas modules of uniform material with dimensions200*150*25.4mm, as shown in the figure6, stepped wedge test block
6ladder blocks (each25，4mmhigh) form a module. above3one and next3a“fold", it can become a200*200*76.5mm size module. As shown in the picture7, high contrast resolution test plug-in
Used with line-to-card, a groove for placing the line-to-card is opened on the test board, which can support line-to-card horizontal, vertical and45Virtual rotation positioning, line-to-card size:50*50mm. The module size is200*150*25.4mm。8, slot block (mold base)
The phantom has an opening that can be used to fix and position other modules to place different modules to achieve different parameter measurements. Module outer dimensions:200*200*76.5mm, slot size:200*150*25.4mm
9、Matching board Made of aluminum, covered3.2mmsize holes, dimensions:200*200*1.5mm
Product consultation
- Previous article:DSA system dynamic test phantom DSA-9
- Next article:German IBA DOSIMAX plus A dosimeter
