KARRAY / PRODUCT DETAILS

German IBA DSA detection phantom RöVi-8

Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management

German IBA DSA detection phantom RöVi-8 image

German IBA DSA detection phantom RöVi-8

Product model:

Brief description:German IBA DSA testing phantom RöVi-8 acceptance testing follows IEC 61223-3-3, DIN 6868-54 routine testing follows DIN 6868-8 Specially designed for DSA testing If your X-ray machine has a digital subtraction angiography (DSA) function, in order to ensure the normal operation of the machine, it is not enough to conduct fluoroscopic inspections. What you need more is the testing of DSA special parameters.

  • Manufacturer strength

    Manufacturer Strength
  • Valid warranty

    Valid Warranty
  • Quality assurance

    Quality Assurance

Products

PRODUCT CATEGORY

Detailed introduction

Product introduction

l germanyIBA DSA testing phantom RöVi-8 acceptance testing follows IEC 61223-3-3, DIN 6868-54 routine testing follows DIN 6868-8

l Designed forDSA detection design

l If yourThe X-ray machine is equipped with a digital subtraction angiography (DSA) function. In order to ensure the normal operation of the machine, it is not enough to conduct fluoroscopic inspections. What you need more is the detection of DSA special parameters.

l inWith the help of RöVi-8 test phantom, you can quickly and easily complete various DSA testing items required by international standards.

l When scanning, please manually press the air bag to drive the blood vessel simulation plate to simulate the real condition of blood vessels.

Product features

l dynamic range

l Artifact

l DSA contrast sensitivity

l Logarithmic compensation error

specific structure

l Main body: organic glass plate

l Seven-level wedge-shaped copper ladder: copper thickness fromLinear variation from 0.2mm to 1.4mm, vertically distributed in the warp direction of the insert plate. There is also a set of copper ladders with thicknesses from 1.4mm to 0.2mm for logarithmic compensation testing.

Blood vessel simulation board : longThe 150mm, 163mm wide simulation board has four aluminum simulated blood vessel strips with a purity of over 99.5% (designed in accordance with ISO 2092 standards). Each blood vessel strip contains four blood vessels with blood vessel thicknesses of 0.05mm, 0.1mm, 0.2mm and 0.4mm. The blood vessel strip is 150mm long and 5mm wide, with a 15mm spacing between blood vessels and can move 10mm in the cross-sectional direction.

Product consultation

Message box

Please enter the calculation result, such as: three plus four = 7

After submission, we will receive your requirements. You can also download the requirement file or call 021-20989890 directly.