Product consultation
Contact
Detailed introduction
DETECTIVE-X-TS is a portable, comprehensive high-resolution gamma spectrometer that can be used for field measurements.Spectra can be collected in the field as a stand-alone instrument, or controlled by a computer via a USB, Ethernet, or Wi-Fi connection using applications such as MAESTRO-Pro (included), GammaVision, Isotopic, and more.
DETECTIVE-X-TS is physically identical to the DETECTIVE-X radioisotope identifier, known as the “gold standard” in mission-critical detection and identification. Similar to ORTEC's past TRANS-SPEC-100T and MICRO-TRANS-SPEC equipment, the DETECTIVE-X-TS is specifically designed as a more economical, portable, high-resolution gamma spectrometer for on-site measurements, not just as an automatic nuclide identification instrument. DETECTIVE-X-TS models includeGuaranteed resolution performance and MCA emulation software, but does not include isotope identification applications in other DETECTIVE-X models (Detective X, RAPiD, and Sleuth). DETECTIVE-X-TS can be upgraded to DETECTIVE-X 3 MeV and 8 MeV modes and also provides a dose calibration service.
Application characteristics
DETECTIVE-X-TS is physically identical to the DETECTIVE-X radioisotope identifier, known as the “gold standard” in mission-critical detection and identification. Similar to ORTEC's past TRANS-SPEC-100T and MICRO-TRANS-SPEC equipment, the DETECTIVE-X-TS is specifically designed as a more economical, portable, high-resolution gamma spectrometer for on-site measurements, not just as an automatic nuclide identification instrument. DETECTIVE-X-TS models includeGuaranteed resolution performance and MCA emulation software, but does not include isotope identification applications in other DETECTIVE-X models (Detective X, RAPiD, and Sleuth). DETECTIVE-X-TS can be upgraded to DETECTIVE-X 3 MeV and 8 MeV modes and also provides a dose calibration service.
Application characteristics
- Main spectrum display: Log/Lin, Zoom, ROI, Start, End, Clear to collect and save spectra.
- Peak/ROI data: center, FWHM, start/end track address, gross and net area and count rate.
- Configurable spectral tag data: energy, track address, count.
- Configurable status bar: Any two of the following: live time, actual time, remaining live time, remaining actual time, remaining battery, count rate, count rate for ROI.
- MCA control: ADC conversion gain with upper and lower level discriminator, coarse and fine amplification gain, baseline recovery (auto, fast, slow), gain and pole zero, high voltage switch.
- Get presets: Live Time, Actual Time, ROI Peak and ROI Integral.
- Health: ±12 V, +3.3 V, Detector Temp, Cooler Temp, Cold Junction Temp, High Voltage.
- Security: Password protected user/admin mode, Lock/hide spectrum display during acquisition.
- Energy scale: Quadratic fit of energy vs. address.
- Application interface: Compatible with all ORTEC CONNECTIONS-based applications, such as MAESTRO, MAESTRO-Pro, GammaVision, Isotopic, Renaissanceand has a wide range of applicability A11 Kit.
