Products

Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management

Search products

Search

806 products

Full body and half body simulation phantom

View product

Product model: KR601 Brief description: Simulation phantom, product compatible with X-ray CT and MR. It is primarily used in various patient positioning techniques. Typically purchased by medical schools and teaching hospitals for use by radiology and other medical professionals. The model's design is based on a 24-year-old model who is 40 inches (90 cm) tall. The model is a life-size half-length anthropomorphic model with anatomically correct organs and bones, constructed from 10 body parts. Weighs approximately 20kg.

KR505 mold (magic) cube measurement phantom

View product

Product model: Brief description: Designed for routine QA in RT and IMRT applications, the model is easy to use and quick to set up. It faithfully simulates linear attenuation to within 1% from 50keV to 15MeV. This enables complete QA from CT image acquisition to treatment dose verification. The 20 cm cube is suitable for head/neck and torso treatment.

MRI performance testing phantom Magphan SMR100

View product

Product model: Brief description: American Phantom Laboratory MRI Nuclear Magnetic Resonance Performance Testing Phantom Magphan SMR100: Magnetic resonance performance testing phantom, cylindrical phantom and spherical phantom of acrylic material, inner diameter 20cm, copper sulfate solution is added inside the phantom to detect spatial resolution (high resolution), density resolution (low contrast), measurement signal-to-noise ratio, T1, T2 values, geometric linearity and other parameters.

NMR performance testing phantom Magphan SMR170

View product

Product model: Brief description: American Phantom Laboratory MRI performance testing phantom Magphan SMR170 is designed to perform various performance evaluations of magnetic resonance imaging (MRI) scanners. The Magphan SMR170 magnetic resonance performance testing phantom has a traditional cylindrical housing used by test groups and manufacturers who base their performance specifications on the cylindrical phantom. It has a removable end panel for internal access. The acrylic cylinder has an outer diameter of 20 cm and an inner diameter of 19 cm.

Domestic NMR performance testing phantom SMR170

View product

Product model: Brief description: MRI nuclear magnetic resonance performance testing phantom SMR170: Magnetic resonance performance testing phantom, cylindrical phantom and spherical phantom made of acrylic material, inner diameter 20cm, copper sulfate solution is filled inside the phantom, and parameters such as spatial resolution (high resolution), density resolution (low contrast), measurement signal-to-noise ratio, T1, T2 values, geometric linearity, etc. are detected. The SMR100 phantom includes a 20cm spherical shell and a 10cm cube test block.

KR504 chest phantom

View product

Product model: Brief description: The material and structure of the chest phantom. The chest phantom is composed of tissue equivalent materials (such as soft tissue equivalent materials, lung tissue equivalent materials, etc.), with a length of about 18cm, a width of about 30cm, and a height of about 20 cm. The diameter of the measuring plug-in is about 6.5 cm, with a built-in ball in which the measuring film can be placed.

KR503 dome mold body, spherical mold body

View product

Product model: Brief description: The sphere phantom is made of polystyrene, acrylic and other materials; it is a square phantom containing an acrylic sphere, which represents the irradiation target area during measurement. Measuring film can be placed in the sphere. The size of the sphere varies depending on the phantom it is embedded in (such as head and neck phantom, dome phantom, etc.).

KR502 automatic quality assurance deviation detection phantom

View product

Product model: Brief description: The automatic quality assurance deviation detection phantom (AOA phantom) is composed of polystyrene, acrylic, tungsten and other materials, with multiple gold labels embedded inside. The distance between gold labels is greater than 20mm, the triangle angle formed by every three gold labels is greater than 15°, and there is no overlap in the 45° field of view on both sides. There is a place for processing-free film in the cube structure of the phantom.

MRI and CT magnetic resonance distortion phantom radiography quality control equipment

View product

Product Model: KR501 Brief Description: Product Introduction MRI and CT Magnetic Resonance Distortion Phantom - Evaluate image distortion of large-aperture MRI and CT. The large-field MRI distortion phantom is designed to evaluate magnetic resonance imaging distortion caused primarily by nonlinearities in magnetic gradients. It can also help quantify susceptibility to MRI image distortion due to chemical shifts and density differences common in diagnosis and RT treatment planning.

Ultrasound diagnostic quality control testing phantom

View product

Product model: Brief description: The standard ultrasound phantoms used for image quality control of conventional and modern breast ultrasound equipment are as follows: 404 GS LE 0,5 phantom, serial number: VD0403335 LE, high-precision small markers, grayscale scale ultrasound phantom attenuation 0,5 dB/cm/MHz (standard) 404 GS LE 0,7 phantom, serial number: VD0403340 LE, high-precision small marker, gray scale ultrasonic phantom, attenuation 0,5 dB/cm/MHz (standard) attenuation 0,7 dB/cm/MHz

Tungsten edge phantom TX 5

View product

Product model: Brief description: Meets the "WS76-2020 Quality Control and Testing Specifications for Conventional Medical X-ray Diagnostic Equipment" and the IEC 62220-1 standard, and is used for the determination of modulation transfer function (MTF). Composition: It consists of a tungsten plate (1 mm thickness) with an edge of ±5μm fixed on a 3mm thick lead plate

German IBA line pair card

View product

Product model: Type TYP46 Brief description: The German IBA line pair card is mainly used to test the high resolution of X-ray machines.

TYPE9-2.0 new high-resolution test card second degree star card

View product

Product model: Brief description: German IBA TYPE9-2.0 new high-resolution test card Second-degree star card German IBA TYPE9-2.0 type line pair card Second-degree star card is mainly used to test the high resolution of X-ray machines. The lead foil thickness is 0.06mm and the diameter is 5.3mm

German IBA TYPE81 line pair card

View product

Product model: Brief description: German IBA TYPE81 line-to-card German IBA type81 line-to-card type line-to-card is mainly used to test the high resolution of X-ray machines. Measuring range: 0.6-10.0LP/MM, number of groups: 20 groups. The lead foil thickness is 0.1mm and the size is 55X65mm.

German IBA TYPE18D line-to-card

View product

Product model: Brief description: German IBA TYPE18D line pair card is mainly used to test the high resolution of X-ray machines. Measuring range: 0.5-20LP/MM, number of groups: 14. Lead foil thickness is 0.1mm, size is 47mmX57mm. Lead equivalent: 0.03mmPB

German IBA TYPE39c line pair card

View product

Product model: Brief description: German IBA TYPE39c line pair card is mainly used to test the high resolution of X-ray machines. Measuring range: 1.5-12LP/MM, number of groups: 14. The lead foil thickness is 0.06mm and the size is 30X60mm.

German IBA TYPE39B line pair card

View product

Product model: Brief description: German IBA TYPE39B line pair card is mainly used to test the high resolution of X-ray machines. Measuring range: 1.5-30LP/MM, 14 groups. Lead foil thickness is 0.06mm, size is 30X60mm. Resolution range: 1.5-30 lp/mm

German IBA TYPE39a line pair card

View product

Product model: Brief description: German IBA TYPE39a line pair card is mainly used to test the high resolution of X-ray machines. Measuring range: 1.5-25LP/MM, number of groups: 14. Lead foil thickness is 0.06mm, size is 30X60mm. Resolution range: 1.5-25 lp/mm

American screen adhesion test phantom FFA 4090R

View product

Product model: Brief description: Test tool for checking the adhesion performance of the Internal dimensions of the film box (cm): L42 / B49 / H0.7 External dimensions of the film box (cm): L44 / B51 / H0.9

Type KR311 light field ruler

View product

Product model: Brief description: The light field and radiation field consistency detector can be used at voltages as low as 30 kV and can give objective, reproducible and immediately readable results. Product introduction of the optical field detection ruler: The sensor arrangement of the light field and radiation field consistency detection ruler is specially designed to meet the needs of real-time detection of the consistency of the radiation field and the indicator light field of the radiograph, breast machine.