Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management
806 products
View product
Product model: Brief description: KR1102 PMMA dose phantom breast detection Serial number: VD1003110 Used to measure CT dose index according to IEC 60601-2-44, IEC 61223-2-5 (DIN EN 60601-2-44, DIN EN 61223-2-6) standards. Phantom specifications: PMMA head phantom, diameter 16cm, 5 holes and plugs
View product
Product model: Brief description: Breast phantom, PASMAM digital mammography detection phantom Serial number: VD0203710 According to German standard PAS 1054, used for acceptance or stability (census and clinical) testing of digital mammography (CR/DR).
View product
Product Model: Brief Description: The School of Radiology Breast Machine Imaging Quality Evaluation Model provides an elegant quality tool for today's imaging systems. The KR1101 Breast Phantom's proven simulation technology enables tissue-equivalent, realistic models for mammography quality. The resin material mimics a range of photon attenuation coefficients of breast tissue. The average elemental composition of the simulated human breast is based on the individual elemental compositions of fat and glandular tissue reported by Hammerstein.
View product
Product model: Brief description: The outer covering layer simulates adipose tissue, and the objects inside simulate microcalcifications, breast duct fibrocalcifications and tumor masses in glandular tissue. It is used for screen/slice mammography and can also be used for CR/DR digital mammography.
View product
Product model: Brief description: FFA 4090 M screen adhesion test phantom Serial number: VD0203281 Complies with EN ISO 4090 standard, used to test the screen adhesion performance in mammography film boxes. The size of the test film cassette can reach 24 x 30cm.
View product
Product model: Brief description: CDMAM 4.0 breast machine low contrast detail phantom (threshold low contrast detail phantom)Phantom composition:Each single diameter has its own unique optimized thickness range of gold, with 16 different thickness levels0.5 mm thick pure aluminum substrate (purity: 99.5%)
View product
Product model: Brief description: Product introduction CDAM3.4 Mammography low contrast detail phantom including analysis software and carrying case Serial number: VD0203701 Used for acceptance testing and annual status testing (census) of mammography census and clinical diagnosis - BMU announced on January 12, 2007.
View product
Product model: Brief description: Acceptance testing and annual status testing (census) for mammography screening and clinical diagnosis - BMU announced on January 12, 2007. Mold body design performance: 0.5mm aluminum (99.5%) substrate
View product
Product model: Brief description: Slit real-time focus meter 1. Slit imaging technology, accurate measurement results 2. Non-film exposure measurement, easy and fast to use 3. Computer processing, eliminating deviations caused by artificial readings 4. Double exposure, automatically correcting magnification, no need to know the exact position of the focus. 5. Intelligent data processing, simple operation and good repeatability
View product
Product model: Brief description: Features Focal spot measurement according to IEC60336 and NEMAXR5-1984 includes measurement stand with universal stand for ideal positioning of star test patterns or slit cameras. This focus spot measurement stand allows for easy adjustment and precise positioning of slit cameras or star test patterns for determining focal spot size and modulation transfer function.
View product
Product model: Brief description: LXchroma luminance meter and colorimeter Serial number: VD0601500 is an integrated device for luminance and chromaticity measurement. It is an ideal testing tool for color image displays. It is suitable for: LCD liquid crystal display LED liquid crystal display PDS plasma display EL organic electroluminescence display FED electroluminescence display
View product
Product model: Brief description: LXcan point luminance meter Serial number: VD0601400 Monochromatic luminance meter with built-in discrete light tube and screen contact measurement mask, an ideal quality control measurement tool that complies with IEC, AAPM and DIN standards Technical specifications: Display: 1.2″TFT (65,000 colors) Sensor consistency: user-defined Distance sensor: ultrasonic distance measurement Target positioning: windowing
View product
Product model: Brief description: Microsoft Windows operating software, used for computer-guided testing and data recording (acceptance and stability testing) of medical imaging display devices, in compliance with DIN V 6868-57, IEC 1223-2-5 and AAPM TG18 quality control requirements for medical displays.
View product
Product model: KR1002 Brief description: The solid water phantom is a quick and easy alternative to traditional water tanks for routine testing of linear accelerator photon beams* Product Features Each Water is tested for water equivalence in an independent calibration laboratory before being put into use. The phantom pieces produced from this special material are strong enough and will not stick together when stacked and stored. Changes in temperature and humidity do not affect the water in any way.
View product
Product model: KD1001 type Brief description: Quick and easy, it can replace the traditional water tank for routine detection of linear accelerator photon beams* Product characteristics Each Water is tested for water equivalence in an independent calibration laboratory before being put into use. The phantom pieces produced from this special material have high enough strength and will not stick together when stacked and stored.
View product
Product model: Brief description: Limb bone density phantom limb phantom (limb phantom for short) is made of radiation-equivalent solid water material [composed of polyethylene (CH) and a small amount of magnesium oxide (MgO) and calcium carbonate (CaCO)] and bone mineral [hydroxyapatite (CaOH (PO))]. The thickness of the phantom and the cylindrical bone sample simulated the measured site and cylindrical bone.
View product
Product model: Brief description: The ultrasonic bone density test phantom A.1 radius bone phantom is shown in Figure A1. The shape is rectangular (length: 135mm, width: 50mm, height: 21mm). The material density is required to be uniform and the surface is highly polished. Its dimensional tolerance does not exceed ±0.1mm. The radius phantom and calcaneus phantom are as shown, with a rectangular shape (length: 60mm, width: 50mm, height: 40mm), and its dimensional tolerance does not exceed ±0.1mm. The surface is highly polished and its dimensional tolerance does not exceed ±0.1mm.
View product
Product model: Brief description: Density parameter HA50 1.16 density HA200 1.26 density HA800 1.65 density HA 1000 1.78 density HA1200 2.23 density Basic material: warp base gray
View product
Product Model: Brief Description: Unilight S Sensitometer Serial Number: VD0204110 Performs 21-level wedge exposure on X-ray film, with the option of blue or green light, with long-term stability and repeatability to produce accurate wedge exposure.
View product
Product model: Brief description: Unilight D density meter Serial number: VD0204108 Obtains film processing parameters through step measurement of 21-step optical wedge photos, and can measure the optical density of X-ray films up to 35 x 35cm. Optical density measurement range: D = 0.00 to D = 4.5
