KARRAY / PRODUCT DETAILS

American TISCH TE-5000 high flow TSP sampler

Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management

American TISCH TE-5000 high flow TSP sampler image

American TISCH TE-5000 high flow TSP sampler

Product model:

Brief description: High flow air samplers are recommended instruments for sampling large volumes of air in a collection of TSP (Total Suspended Particulate Matter)  The physical design of the sampler is based on aerodynamic principles which results in a collection of particles of 100 microns (Stokes equivalent diameter) and below  The TE-5000 TSP sampler is constructed of TE-5001 anodized aluminum housing, TE-50038" x 10" stainless steel filter holder

  • Manufacturer strength

    Manufacturer Strength
  • Valid warranty

    Valid Warranty
  • Quality assurance

    Quality Assurance

Products

PRODUCT CATEGORY

Related articles

RELATED ARTICLES

Detailed introduction

USATISCH TE-5000 high flow TSP sampler

Product introduction:

l High flow air samplers are the recommended instruments for sampling large volumes of airCollection of TSP (Total Suspended Particulate Matter)

l The physical design of the injector is based on this resultingCollection of particles 100 microns (Stokes equivalent in aerodynamic diameter) and below

l inTE-5000 TSP Sampling consists of TE-5001 anodized aluminum housing, TE-50038" x 10" stainless steel filter holder

l TE-5005 aluminum alloy blower motor assembly, TE-50077-day mechanical timer

l TE-5009 Continuous Flow/Pressure Recorder, and TE-5010 Automotive Voltage Control

Product features:

l Ambient air monitoring to determine quality standards relative to end-of-air particulate levels

l Combined with source-specific effects on ambient levels of suspended particlesModifications to "Wind Direction Activation"

l A source that allows sampling operations only if the condition is such

l Monitoring closed environments for relatively high levels of particulate matter, especially toxic substances

l Emission monitoring vents from large diameters, where body conditions Inspection equipment using traditional stack

Technical parameters:

Intake dust removal efficiency

Comply with Federal Regulations AddendumBEPA Code Part 50

flow rate

39 CFM€"60 cubic feet (1.1~1.7mA³)

filter media

fiberglass filter8“×10"(TE-G653)

flow control

Motor speed voltage control/Elapsed time indicator (TE-5010)

Motor fan

Level 2 vacuum 0.6 HP 110V/60HZ (TE-116311) 220V/50HZ (TE-116312)

flow indicator

continuous flow/Pressure Recorder (TE-5009)

Size

45.5" x 22.5" x 20" sampling box, 19" x 14" x 14" lid carton

weight

70 pounds – sampling box, 9 lb – lid carton

Assembly space requirements

24" square x 53" tall

Power requirements

Single phase with grounding,110V/60HZ or 220V/50HZ

Motor product specifications

110V/60HZ€" Part Number TE-116311, 2 Stage Vacuum 0.6 HP, Dual Ball Bearing Through Current Discharge


220V/50HZ€"Part number TE-116312, 2 stage vacuum 0.6 HP, ball/oil bearing, flow discharge

Altitude application

Arrive10,000 feet elevation

Ambient temperature application range

-30 to +50ºC

Relative humidity applications

0 - 100%

Sampling delay start range

0 - 7 days

Starting current

12 amps

Running Ampere

6 amps

Product consultation

Message box

Please enter the calculation result, such as: three plus four = 7

After submission, we will receive your requirements. You can also download the requirement file or call 021-20989890 directly.