KARRAY / PRODUCT DETAILS

RAD-60 Personal Dosimeter

Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management

RAD-60 Personal Dosimeter image

RAD-60 Personal Dosimeter

Product model:

Brief description:RADOS’s RAD-60 personal alarm dosimeter is a precision radiation meter capable of reliable detection and dose accumulation to ensure user safety. When used alone, the instrument is suitable for a wide range of daily radiation monitoring purposes. Programmable parameters and the ability to operate in extreme environmental conditions make this instrument a unique multi-purpose and real-time personal dosimeter.

  • Manufacturer strength

    Manufacturer Strength
  • Valid warranty

    Valid Warranty
  • Quality assurance

    Quality Assurance

Products

PRODUCT CATEGORY

Related articles

RELATED ARTICLES

Detailed introduction

RAD-60 Personal Dosimeter

Product introduction:

l RADOS's RAD-60 personal alarm dosimeter is a precision radiation measuring instrument that can reliably detect and accumulate doses to ensure user safety.

l When used alone, the instrument is suitable for use in a wide range of applications for routine radiation monitoring purposes.

l Programmable parameters and the ability to operate in extreme environmental conditions make this instrument a unique multi-purpose and real-time personal dosimeter

l The lightweight design allows users to continuously and reliably record cumulative doses anywhere

l When measurements exceed exposure limits, a presettable alarm will alert the user.

l RAD-60 dosimeter offers better resolution, wider measurement range, higher durability and reliability compared to traditional ionization chambers

l and provides feasible additional features such as real-time digital display and user-settable alarms

l Silicon diode-based detector design offers compact size, and other design features effectively eliminate external interference such as vibration and radio frequency

l The electronics design of the RAD-60 includes optimization of built-in program memory using self-diagnostic operations

l Most important operating parameters are stored in non-volatile erasable read-only memory to ensure important information in the event of power failure

l The RAD-60 uses one AAA alkaline battery

l The smooth and ergonomic design of the housing makesRAD-60 is waterproof and easy to remove stains

 

Product application:

l Civil protection

l military system

l rescue work

l Industrial flaw detection

l nuclear medicine

l customs

Features:

l Can be used independently

l Digital display of cumulative dose or dose rate

l User-selectable dose and dose rate alarm levels

l The detector system utilizes high-quality energy supplements

l compensated silicon diodes and advanced precision dose rate linearization methods

l Waterproof construction and shock-resistant plastic housing with retaining clips

l Energy Compensation Silicon Diode

Technical parameters:

dose

1μSv - 9.99Sv or 0.1mrem - 999rem

dose rate

5μSv/h - 3Sv/h or 0.5mrem/h - 300rem/h

dose rate linearity

±15%

Calibration

better than±5%(Cs-137, 662keV at 2mSv/h), Hp(10)

energy response

Hp(10), 60keV–3MeV, better than ±25%; better than ±35% within 6MeV

dose rate linearity

Better than ±15% within 3Sv/h (300rem/h)

Audible alarm

7 independent alarms, no less than 85 dB at 30 cm

Alarm threshold

For cumulative dose and dose rate, there are 6 preset values, selected via buttons

power supply

one sectionAAA alkaline batteries, typically 1800 hours of use under baseline conditions (dose mode)

Reader connection

The reader can be connected through the infrared interface at the bottomADR – 1, analyzed with RADOS PC software

temperature range

Use at -20 - +50oC, humidity within 90% RH, store at -20 - +70oC

Working humidity

10%-90% (relative humidity)

Detector type

Silicon (crystal) diode

Detectable radiation types

gamma rays and x-rays

Size

78×67×22mm

weight

battery included 80 g

Product consultation

Message box

Please enter the calculation result, such as: three plus four = 7

After submission, we will receive your requirements. You can also download the requirement file or call 021-20989890 directly.