VACUDAP Bluetooth® Edition Wireless DAP Dosimeter
Product model:
Brief description:The dose and area product (DAP) measurement system VacuDAP, an accessory for radiological and fluoroscopic diagnostic X-ray equipment, is ideally suited for monitoring whether the dose received by the patient complies with local regulations. The VacuDAP Bluetooth® version offers the advantages of a wireless solution even more suitable for portable and mobile X-ray equipment.
Manufacturer strength
Manufacturer Strength
Valid warranty
Valid Warranty
Quality assurance
Quality Assurance
Product consultation
ContactProducts
PRODUCT CATEGORYRadiological imaging quality control equipment
American RSD phantomCRDR machine detection toolCT detection toolsDental machine testing toolsBreast testing kitDSA performance testing toolRadiotherapy and Nuclear Medicine TestingX-ray machine multifunctional quality detectorConventional X-ray photography inspection phantomUltrasound diagnostic quality control testing phantomMultifunctional dose area product meterMagnetic Resonance Machine Testing Toolsbone density phantomSimulation phantomsolid waterSensitometers and Densitometersluminance meterPortable Radioisotope Identification Device (RIID)
Detective-200 rugged, ultra-high sensitivity, portable HPGe radionuclide identification systemRADEAGLE-Cx high sensitivity, high adaptability detection unit, suitable for diversified radiation detection and nuclide identification applicationsRADEAGLET-R Rugged, lightweight, handheld radionuclide identification deviceRADEAGLE, the handheld radioisotope identification instrumentDetective-100T HPGe-based handheld radioisotope identifierMicro-Detective Ultralight Portable Handheld Radioisotope IdentifierDetective X ultra-high resolution HPGe radioisotope identification deviceDetective DX1 is a new generation, ultra-high-resolution and high-purity germanium nuclide identification instrument.Micro-Detective-HX Advanced Handheld Radiation Detection and Identification RIID- Counters, timers, rate meters and multi-channel scalers (MCS)Digital current integratoramplifierCables and accessoriespreamplifierpulse generatormulti-channel analyzerSingle channel analyzerDelays, Gates and Delay Generators, Logic Blocks and Linear GatesFast timing discriminatorTime-to-amplitude converters and calibratorsHV Bias/NIM Power Supplies and Power EnclosuresPhotomultiplier tube (PMT) base
- timing systemGammaScreen-8 Total Gamma Screen Counterα/β counterStandFAST II Standing Full Body CounterOnline monitoring systemOS1700 Tritium AdopterCompton suppression counting systemPINS3-CF Chemicals and Explosives Identification SystemCustomized systemwaste analysis systemchemical identificationnuclear safeguardshealth physics systemfood monitoring system
- FRAM plutonium and uranium isotope analysisMGA++ γ-ray isotope ratio actinide analysisNuclide Navigation-Pro, interactive nuclide map, reference softwareRenaissance whole body counter softwareANGLE advanced gamma spectrum measurement efficiency calibration softwareAlphaVision alpha spectrum measurement softwareDataMaster spectrum file format converterGammaVision gamma spectrum analysis softwareGammaVision Report GeneratorGlobal Value Productivity Suite by GammaVisionISOTOPIC gamma spectroscopy waste determinationMAESTRO Multichannel Analyzer SimulationMAESTRO-Pro Advanced Spectrum SoftwareCONNECTIONS Programmer's Toolkit
Related articles
RELATED ARTICLES
Detailed introduction
Product introduction
dose times area product (DAP) measuring system VacuDAP, an accessory for radiological and fluoroscopic diagnostic X-ray equipment, is ideally suited for monitoring whether the dose received by the patient complies with local regulations. VacuDAPBluetooth®version offers the advantages of a wireless solution and is more suitable for portable and mobileX-ray equipment.
VacuDAP Bluetooth®version
• Used to measure dose times area product (DAP), dose and areaproduct rate(DAP rate) and irradiation time S• data
available on the display unit andWireless connection between DAP dosimeters
transmission
• passPreparepassed/electricitybluebrainTeeth®Technology, data cantransmitted directly toX-ray equipment
• No need to install cables, more economical, convenient and time-saving
• Powered by rechargeable lithium battery or plug-in power supply
• The display unit is powered by a plug-in power supply
• Display unit providesRS232 serial interface, used to transmit data to the RIS system or connect to a printer (optional)
• VacuDAP-C and VacuDAP-C duo is also available with Bluetooth®Adapter for wireless communication
Product consultation
- Previous article:VACUDAP Standard Standalone DAP dosimeter
- Next article:DAP dosimeter that can measure air kerma
