KARRAY / PRODUCT DETAILS

German BERTHOLD LB123D surface contamination meter

Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management

German BERTHOLD LB123D surface contamination meter image

German BERTHOLD LB123D surface contamination meter

Product model:

Brief description:German Berthold LB123D measures surface contamination, γ dose rate, neutron dose rate and activity It can also be configured with different probes to measure α/β nuclides, β/γ nuclides, and even tritium LB123 is not only a simple instrument, but also a complete radiation protection measurement system, which can measure surface pollution, γ dose rate, neutron dose rate and activity

  • Manufacturer strength

    Manufacturer Strength
  • Valid warranty

    Valid Warranty
  • Quality assurance

    Quality Assurance

Products

PRODUCT CATEGORY

Related articles

RELATED ARTICLES

Detailed introduction

germanyBERTHOLD LB123D Surface Contamination Meter

Product introduction:

l germanyBerthold LB123D measures surface contamination, gamma dose rate, neutron dose rate and activity

l Different probes can also be configured to measureAlpha/beta nuclides, beta/gamma nuclides, and even tritium can be measured

l The LB123 is not only a simple instrument, but a complete radiation protection measurement system that can measure surface contamination, gamma dose rate, neutron dose rate and activity

l Different probes can also be configured to measureAlpha/beta nuclides, beta/gamma nuclides, and even tritium can be measured

l The LB123 contains a power-driven data collector that can be connected to seven different radiation detectors and the system can automatically identify them.

l Probe includes: high voltage power supply, preamplifier and discriminator

l LB123 is easy to operate, and the instrument’s microcontroller program can provide many functions.

l Data passesRS232 serial port transmission to host or printer

Features:

l LB123 uses the same probe as LB122: a proportional counter tube filled with xenon, butane or P-10. Through a special adapter, it can be used interchangeably with the probe of LB122.

l stored in the instrumentScale factors for 35 nuclides. Users can also enter and save their own scale factors.

l by entering the submenu<Select Nuclide> to select the nuclide and its scaling factor

l Submenu operations can be easily performed through soft keys.

l Use the wall bracket,LB 123 becomes a semi-stationary personnel pollution monitor, which can be used as an on-site continuous dose rate monitor or as a personnel entrance and exit pollution monitor.

l The LB 123 uses a rechargeable battery. The LB 123 can be easily removed from the stand and used as a portable dose rate monitor.

l Comes on wall bracket230V or 135V AC input can not only replace dry batteries to power the instrument, but also charge the rechargeable battery in the instrument.

 

Technical parameters:

LB123D host

Display

High contrast LCD dot matrix display, resolution rate32 x 84 pixels

Backlight lighting (can be turned off),4-digit display of measurement results, automatic range expansion

Operation

5 keys, 1 switch key, 4 soft keys

Probe connection

8-pin socket Fischer 04, spiral cable LB 75576 (standard)

Data output (optional)

FSMA connector, via beamguide and beamguide interface with D 25 connector LB 75306

temperature range

-15°C - 50°C

Size

145 mm (H) x 170 mm (W) x 45 mm (D)

weight

approx.0. 8kg (including battery)

power supply

3 x IEC-R14 or 3 x rechargeable Varta NiCd #5014 batteries

battery life

UseR14 >150 hours

Probe adapter LB 7637

Instrument size

160 mm (including handle height), 140 mm (width), 240 mm (depth)

weight

1.5 kg (including probe)

wall bracket LB 1250

low voltage power supply

+ 5 V via mains adapter LB 7619

Size

68 mm (height) x 245 mm (width) x 77 mm (depth)

Shipping box size

180 mm (H) x 450 mm (W) x 350 mm (D)

dose rate probeLB1236

Size

50 mm(Ø), 275 mm (L)

weight

0,46 kg

temperature

-10°C- 60°C

Counting tube

 LB 6006 A

calibration factor

0,20 µSv/h per 1 cps

Measuring range

0,05 µSv/h-10 mSv/h

energy range

30 keV – 2 MeV (±30% r relative to 137Cs)

Product consultation

Message box

Please enter the calculation result, such as: three plus four = 7

After submission, we will receive your requirements. You can also download the requirement file or call 021-20989890 directly.