KARRAY / PRODUCT DETAILS

German BERTHOLD LB 112 fixed dose rate detector

Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management

German BERTHOLD LB 112 fixed dose rate detector image

German BERTHOLD LB 112 fixed dose rate detector

Product model:

Brief description:The LB112 microgamma data logger is a fixed low dose/high dose rate measurement system with one or two independent detectors or monitors Operation of the device is controlled with a simple menu and soft keys Operation of the LB112 is performed with 5 soft keys underneath the vacuum fluorescent display with adjustable brightness

  • Manufacturer strength

    Manufacturer Strength
  • Valid warranty

    Valid Warranty
  • Quality assurance

    Quality Assurance

Products

PRODUCT CATEGORY

Related articles

RELATED ARTICLES

Detailed introduction

germanyBERTHOLD LB 112 fixed dose rate detector

Product introduction:

l The LB112 microgamma data logger is a fixed low dose/high dose rate measurement system with one or two independent detectors or monitors

l Operational control of the device using a simple menu and softkeys

l operationalLB112 carries a vacuum fluorescent display below with 5 soft keys, with adjustable brightness

l All parameters are password protected

l oneThe INFO key brings up a menu with important information during the measurement process

l If the dose rate unit is changed, the result is automaticallyrenormalised

l dose rate, also available as output current via two analog outputs0/4-20mA, linear or logarithmic scale

l The instrument has a wide range of AC power inputs between85 and 264 V or 9 to 36 V DC input for battery operation

l Can store up to4000 data and transferred to external computer via two serial interfaces

l oneThe RS-485 interface is already built-in, so no external power adapter is required.

l Through the serial interface,Ehernet or USB data transfer can be done by using F2C protocol

l Measuring electronics housed in a compact stainless steel housing

l The entire electronic system consists of a printed circuit board on which a small power supply unit is placed

l There's a keyboard on the front and an easy-to-read graphic vacuum fluorescent display behind it (640×128 pixels)

l Can test and alarm signals, the acoustic signal is reset by two buttons on the right side of the housing

l The device is turned on and off using an internal power switch

l External signal column, can be equipped with various alarm units (permanent lighting, flashlight or horn)

Features:

l Compact measuring device for wall mounting in stainless steelIP65 sealing

l Connect two dose rate probes or other detectors (single or dual probe operation)

l low dose/high dose rate system

l Radioactive gas monitoring

l Tachometer or scaler timer mode

l memory4000 data points

l Electrically separated inputs and outputs, e.g.RS232/RS485 interface, USB interface, Ethernet interface, 3 digital inputs, 2 analog outputs, 5 relay outputs

l Data transmission and communication in local and large-area measurement networks

l withF2C protocol network functions

l Easy-to-read graphic vacuum fluorescent display

l Alarm signal for measuring station with local alarm function (light, flashlight, horn)

l Local alarm function Freely programmable acoustic signal reset option

Measurement mode

Tachometer and scaler/timer

show

Vacuum fluorescence (64×128 pixels)

memory

Gundam4000 sets of data

power supply

The wide range is85 to 264 VAC or 9 to 36 VDC, depending on power module input

Power consumption

approx.12 W

temperature range

-5°C to 50°C

relative humidity

10%~80%, non-condensing

Protection level

IP65

Overall dimensions

200×200×80mm³

weight

2.6kg, stainless steel case

l Password-protected measurement parameters and internal jumpers* data storage capabilities,RS232 supports two-way communication

Technical parameters:

Product consultation

Message box

Please enter the calculation result, such as: three plus four = 7

After submission, we will receive your requirements. You can also download the requirement file or call 021-20989890 directly.